CAPPING SET - VERTICAL
As per IS:1199(Part-5). Complete with Cylinder capper and Capping plate for concrete blocks.
CEMENT SAMPLER FOR BAG - IS:3535
As per fig.2 of IS:3535-1986 (R.A.2018)
DRY ICE MAKING MACHINE
Portable Dry Ice Making Unit. (Without cylinder) for Lab. Each cake Weight 80-100 grams along with copper Tubing with both end fitting. Dry ice equipment is ideal if requirement is small and occasional. Supplied with Copper tubing connector with threaded fittings for CO2 cylinder, Key – Spanner. Supplied without CO2 cylinder.
MELT FLOW INDEX TESTER
Melt Flow Index Tester designed to determine the melt flow rate of thermoplastic materials, ensuring accurate evaluation of polymer processing characteristics and quality control.
UNIVERSAL TRIAXIAL CELL
For testing of cylindrical specimens of 38mm, 50mm, 75mm, and 100mm diameter with corresponding length to diameter ratio 1:2 as per IS:2720 part XII.
VACUUM OVEN
Double walled, working chamber of cylindrical design made of S.S.316 mirror polished and outside made of S.S.304. The door is of S.S. with center glass window for viewing without opening the door. Temp.controlled from 50°C - 200°C by AUTO TUNING PID Digital Temp. indicating controller, complete with Vacuum gauge, vacuum release valve, a removable shelf but without vacuum Pump. Working on 230 V AC Single phases. Both Inner SS Model and GMP Model are available with us.
CBR/PROCTOR RAMMER-2.6 KG
As per IS:2720 and IS:9198.
PROCTOR COMPACTION RAMMER-4.9 KG
As per IS:2720 (Part VIII) and IS:9198.
SOIL HYDROMETER-(ASTM D422)
The hydrometer test is used to measure the distribution of fine particles (clay and silt) in soils that are too small to be measured accurately using sieves. It is used to determine the percentage of different particle sizes, usually in the range below 75 μm (silt and clay). As per ASTM D422, AASHTO T88, IS 2720 (Part-IV)
RELATIVE DENSITY APPARATUS
The relative density test apparatus, as per IS 2720 (Part 14) and equivalent international standards such as ASTM D4253 and ASTM D4254, is used to determine the relative density (or density index) of granular soils. This test helps measure the in-situ density of granular soils (such as sands and gravels) in relation to their maximum and minimum densities, providing essential data on soil compactness and potential settlement behavior.
COMPACTION FACTOR APPARATUS - IS 1199
AS PER IS: 5515: 1199. The apparatus consist of two conical hoppers and a cylinder, mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trap doors for release and during the fall of the material. Complete with trowel and tamping bar 0‑60 cm long X 16mm dia.
