UNIVERSAL LOAD INDICATOR - MARSHAL - CBR - UCS

TOUCH SCREEN UNIVERSAL CONTROLLER WILL COME WITH FOLLOWING FEATUERS :

1) CBR TEST

1. Indication for penetration & load simultaneously.
2. Digital display of load value at required Penetration value as per IS
3. No need of separate observation on dial gauge
4. Facility to readout rate of loading in mm/minute.
5. Tare system to nullify initial load
6. Penetration range 50.00 mm by linear potentiometer.
7. Load range up to 5000 kg. with load transducer.
8. Penetration & corresponding load value highlights for 0.50, 1.00, 1.50, 2.00, 2.50, 3.00, 4.00, 5.00, 7.50, 10.00 and 12.50 mm penetration.
9. The digital LCD display will retain the peak value until it is cleared.
10. With start & stop button facility.
11. Auto stop at 15.00 mm penetration.  
12. Provision for tare & calibration for penetration & load.
13. Load cell can also be calibrated using standard reference

2) MARSHALL STABILITY TEST.

1. Indication of flow value & load simultaneously.
2. Digital display of load value at required flow value as per IS
3. No need of separate observation on dial gauge
4. Tare system to nullify initial load
5. Penetration range 25.00 mm by linear potentiometer.
6. Load range up to 5000 kg. with load transducer.
7. Holds peak load and flow value on the screen.
8. The digital LCD display will retain the peak value until it is cleared.
9. With start & stop button facility.
10. Auto stop of failure of the sample.
11. Provision for tare & calibration for penetration & load.
12. The controller will automatically apply the correction factor according the the thickness of the samples.
13. The controller will automatically cutoff the machine when machine travels more than 51 mm

3) UNCONFINED COMPRESSION STRENGTH TESTING

1. Digital 3 Speed Unconfined Compression testing machine
2. Flow value and load on a single screen.
3. No need of separate observation on dial gauge and Proving ring
4. Facility to readout rate of loading in mm/minute.
5. Tare system to nullify initial load
6. The digital LCD display will retain the peak value until it is cleared.
7. Flow value with a least count of 0.01 mm with accuracy of 1%.
8. Load value with a least count of 0.1 kg / 0.001 KN with accuracy of 1%.
9. Back light facility to observe the readings even in the dark.
10. Four line readout showing load, flow, speed, and load at every 0.5mm flow value. (scrolling)
11. Digital selection of speed from 1.25 mm/min, 1.5 mm/min and 2.5 mm/min. No need to change the gears.
12. Over load safety at pre decided load.
13. Over travel safety.
14. Auto reverse to home position on pre set over travel
15. Auto internal calibration facility to calibrate load and flow.