NABL Accredited Calibration Laboratory

OXIDATION STABILITY FOR GREASE-IP 142, ASTM D942-WITH PRESSURE GAUGE

Model Number : EIE-PTGT-139P

As per IP‑142 & ASTM D 942, IS 1448 (P‑94). Consists of Oxidation Oil bath, Oxidation Bombs, Dish Holder, Sample Dishes, Analog pressure gauges, Digital Temperature Controller. IP 24C/ASTM 22C Glass Thermometer available at extra cost

TYPE OF OPERATION

Compliance Standards:

ASTM D942, IP 142, IS 1448 (P-94)


Purpose:

This test method determines resistance of lubricating greases to oxidation when stored statically in an oxygen atmosphere in a sealed system at an elevated temperature under conditions of test


Summary of test method:

The sample of grease is oxidized in a pressure vessel heated to 99°C (210°F) and filled with oxygen at 110 psi (758 kPa). Pressure is observed and recorded at stated intervals. The degree of oxidation after a given period of time is determined by the corresponding decrease in oxygen pressure


Brief construction details :

Consists of Oxidation Oil bath, Oxidation Bombs, Dish Holder, Sample Dishes, Pressure Guges, Digital Temperature Controller and Thermometer.


1) Oil Heating Bath:

  1. Double walled Oil Bath/Aluminum Block Heating
  2. Exterior body is fabricated from mild steel material, Powder coated in attractive shades
  3. Inner chamber is fabricated from Stainless Steel Material - S.S. - 304 Grade
  4. Heavy insulation is provided between inner chamber and exterior body to prevent the Thermal Loss
  5. Chamber is fitted with efficient heating element and PT‑100 Sensor to measure the temperature
  6. Bath temperature is controlled by Microprocessor based PID Digital Temperature Controller Cum Indicator.
  7. Equipped with an efficient stirrer to maintain uniform temperature throughout the chamber
  8. Fitted with a suitable arrangement for holding the Bomb (Pressure Vessel)
  9. Temperature control accuracy : ± 0.5 °C
  10. Temperature display : LCD Display
  11. Temperature range : 5 °C above ambient to 150 °C
  12. Pressure Indication : On pressure Gauge
  13. Supplied with over temperature protection safety
  14. Operates on 230 Volt, 50 Hz, Single Phase, AC Supply


2) Pressure Vessel (Oxidation Bomb): - 02 Nos

  1. Oxidation vessel with body, cap, closure ring and stem, constructed from Stainless Steel material
  2. Stainless steel material ensures a proper rate of heat transfer.
  3. The interior surface is given a smooth finish to facilitate cleaning.
  4. Withstands working pressure of 180 psi (1241 kPa) at 99°C (210°F)
  5. Provided with a lead and gasket for sealing.
  6. Two numbers of pressure vessels (bombs) are provided.
  7. Volume without the dish holder and dishes is 185 ± 6 mL


3) Dish Holder: - 01 No

  1. Made of Stainless Steel S.S. - 304
  2. 5 Places (Shelves) in the stand


4) Sample Dishes: - 05 Nos

  1. Made of borosilicate glass
  2. Diameter : 41 mm
  3. No of Dishes supplied : 05 Nos


5) Thermometer : - (at extra cost)

IP 24C/ASTM 22C thermometer having temperature range from 95 to 103 °C graduated in 0.2 °C intervals


6) Pressure gauges for Measurement and Analysis: - 02 Nos

Pressure recording mechanism consists of high quality pressure gauges. Pressure gauge measures pressure inside Oxidation Bomb with accuracy of better than 0.5psi (3.45kPa) in accordance with ASTM specifications. Range : 0-160psi (0-1100kPa), graduated in 1 psi intervals. Cleaned for oxygen service. The pressure gauges can be mounted directly on the vessel stem.