
MELT FLOW INDEX TESTER - MANUAL SAMPLE CUTTING - MANUAL SAMPLE WEIGHING - ASTM D1238-
Model Number : GT-109MCMW
ECONOMY model with manual cutting and Manual sample weighing as per ASTM method A. Further details as mentioned under description.
MFI OPERATION
Compliance with following International Standards:
ASTM D1238, IS 2530, Method A
Applications:
Melt Flow Indexer is used to measure the flow rate of different polymers. The reported Melt Index values helps to distinguish between the different Grades of Polymers. This is due to the fact that plastic materials are seldom manufactured without incorporating additives, which affect the processing characteristics of material like stability and flow ability.
The Melt Flow Index Test measures the rate of extrusion of a Thermoplastic material through orifice of Specific Length and Diameter under prescribed conditions of temperature and pressure.
Note
- Manual sample cutting
- Manual sample weighing
- Manual calculation of results
| Temperature controller | Microprocessor based Digital Temperature Controller |
|---|---|
| Temperature Range | 0 to 400 ⁰C, |
| Temperature Resolution | up to 0.1 ⁰ C |
| Temperature Accuracy | ± 0.1 % F.S.D. |
| Timer | Microprocessor based Digital Timer |
| Timer Range | 0 - 999.9 Seconds and having Preset facility with buzzer output |
| Dead weight | 2.16 Kg & 5 Kg hard chrome plated weights. |
| Accessories Supplied | Orifice, Piston, Material charger, Barrel Cleaner, Orifice cleaner, Sample cutter |
| Sample cutting | Manual Type |
| Weight Lifting | Manual Type |
| Sample weighing | Manually With external Electronic balance |
| Exterior body | Fabricated from Mild Steel Material |
| Body Paint | Powder Coated in attractive shades |
| Power Supply | 230 Volt , 50 Hz, Single Phase, AC Supply |
| Amperes | 4 Amps |
| Dimensions | 17" x 17" x 25" (W x D x H) |
| Weight | 45 Kgs |
| Model | Table Top Model |
