
FLAME PHOTOMETER - 1385E-
Model Number : 1385
Microprocessor Flame Photometer (2F) with Sodium (Na) & Potassium (K) filters, up to 5 point calibration, direct readout in ppm & meq/l, auto filter selection, auto ignition, auto flame failure detection, automatic gas cut-off function, 20x4 line LCD display, Single Aspiration, printer attachment facility supplied with compressor and other accessories for lab & medical use. RS232 Professional PC software for Computer Interface available at extra cost. Detail Specification as per following page. Na/K/Li/Ca/Ba CRM as applicable + double-distilled water plant + Class A volumetric flasks + Class A pipettes/micropipettes + beakers/wash bottle/storage bottles can be supplied at an extra cost
TYPE
Salient Features:
- Microprocessor Based with Printer Interface
- Auto Gas Cutoff
- Auto Flame Failure Detection
- Four Measurements in Single Aspiration
- Setup Storage Facility
- Sample Data Storage Facility
- Curve Calibration Programmability Using Maximum of 5 Standards
- Multiple Calibration Curve Saving Facility
- Data Processing Through Curve Fitting Techniques, Least Square, Quadratic
- Online Help Key
- Direct Results in ppm and meq
- Useful for Medical & Soil Testing
Technical Specification
General Range
- ppm meq/I
- Na: 0-100 Upto 250meq/I, 1:100 dil
- K: 0-100 Upto 250meq/I, 1:100 dil
- Ca: 0-100 Upto 250meq/I, 1:100 dil
- Li: 0-100 Upto 250meq/I, 1:100 dil
- Ba: 50-1000 -
Serum Range
- ppm meq/I
- Na: 0-100 Upto 200meq/I, 1:100 dil
- K: 0-100 Upto 10meq/I, 1:100 dil
- Ca: 0-100 -
- Li: 0-100 Upto 0-2meq/I, 1:5 dil
- Ba: 50-1000 -
Urine Range
- ppm meq/I
- Na: 0-100 Upto 250meq/I, 1:100 dil
- K: 0-100 Upto 100meq/I, 1:100 dil
- Ca: 0-100 Upto 10meq/I, 1:100 dil
- Li: 0-100 -
- Ba: 50-1000 -
- Sensitivity: General: Na: 0.5 ppm, K: 0.5 ppm, Li: 0.5 ppm, Ca: 15 ppm
- Filters: Na & K supplied (Ca & Li are optional at extra cost)
- Resolution: 0.1 ppm/meq
- Reproducibility:< 1% coefficient of variation for 20 consecutive samples using 10 ppm Na set as maximum standard
- Linearity: 2% error when 3 ppm Na/K and 5 ppm Li are set as maximum standard
- Curve Fit: +/- 2% of FS
Accuracy:
- Display:20 x 4 alphanumeric LCD with backlit
- Average Time: In-built in software
- Flame System: LPG and dry oil free air
- Detector: Silicon photodiode
- Calibration: Up to 5-Point calibration with curve fitting software
- Gas Control: Adjustable with knobs
- Flame Failure: Auto detection
- Gas Cutt off: Automatic
- Ignition System: Auto ignition
- Automizer :Axial flow type
- Printer: Provision for attachment of dot matrix printer or HP laser jet/ inkjet (non-windows) printers with Centronics parallel interface
- RS-232C:Available (PC software at extra cost)
- Power:230 V + 10% AC, 50 Hz
- Dimensions:365 x 245 x 220 mm (L x B x H) (Approx.)
- Weight: Main Unit: 9Kg. (Approx.)
Pre-installation requireements :
- We request to you make necessary arrangement of prerequisites LPG gas cylinder with regulator, double distilled water, NACL LR grade, KCL LR grade, NA standard solution (Minimum 5 solution Viz. 2 ppm, 4 ppm, 6 ppm, 10 ppm or as per requirement) and K standard solution (Minimum One Viz. 10 ppm or as per requirement), power supply 230 volt, 50 Hz 25 Amp power plug to carry out the demonstration at your site. Na/K/Li/Ca/Ba CRM as applicable + double-distilled water plant + Class A volumetric flasks + Class A pipettes/micropipettes + beakers/wash bottle/storage bottles can be supplied at an extra cost
