
WATERBATH FOR WATER ABSORPTION TEST OF CERAMIC TILE-(BIS 13630-2, EN ISO 10545-3)
Model Number : TC-103NR
Water Bath for Water Absorption Test of Ceramic Tiles – Boiling Water Method – IS 13630 (Part 2):2019 / ISO 10545-3:2018. Can accommodate tiles sizes up to 300 x 300 mm.
TYPE OF METHOD
Complies with IS : 13630 (Part - 2), ISO : 10545 (Part-3)
Purpose:
For water absorption test of ceramic tiles. The tiles will be placed vertically in the slots provided to conduct the water absorption characteristic test.Testing the water absorption of ceramic tiles is a critical quality control and classification process that ensures the tiles meet specific performance requirements for their intended application.
Features :
- The bath is designed in such a way that 5 Nos. tiles of 300 X 300mm can be placed vertically with no contact between them
- Arrangement is provided so that the samples can be placed in such a way that there is 50mm water above and below the sample throughout the test
- Rectangular shaped water bath
- Double walled construction
- Aesthetically designed
- Outer body is CRC powder coated
- Inner chamber is fabricated from S.S. 304 - Mirror polished
- Fully argon welded construction
- 50mm thick Glass wool Insulation is provided between the inner chamber and exterior body to prevent the direct thermal loss
- Specially designed immersion Heater will be provided for heating within the set point temperature
- Built - in boost heater will be provided for initial fast heating.
- Motorized stirrer for uniform distribution of water temperature
- Supplied complete with instruction manual
Note:
Also Need To Have Following Instruments To Complete The Test Procedure (Extra cost)
- Desiccator
- Silica gel
- Hot air oven
- Electronic balance (5 kg x 0.1 gm)
- Distilled water
- Chamois Leather
| Construction | Double walled in construction |
|---|---|
| Inner chamber | Mirror polished S.S. - 304 |
| Exterior body | CRC |
| Paint | Powder coated in attractive shades |
| Lid of the bath | Matt finished S.S. - 304 |
| Insulation | Glass wool insulation for minimum heat loss |
| Temp Range | 5 °C above ambient to 100 °C |
| Temp control | Microprocessor based Auto-Tune PID Digital Temp Indicator cum controller |
| Temp, Accuracy | ± 0.5 °C |
| Temp. Sensor | PT-100 Sensor |
| Stirrer | Slow speed stirrer for uniform temp distribution |
| Stirrer Motor | Electric motor of 1/20 HP |
| MOC of Stirrer shaft | Anti - corrosive Material |
| MOC of Propeller | Anti - corrosive Material |
| Heating elements | 04 KW |
| Can accommodate | Test specimen up to 300 X 300 mm (AS PER BIS 13630-2 & ISO 10545-3) |
| Operation on | 230 Volts, 50 Hz, Single Phase, AC Supply |
| Supplied with | Vertical stand made from strong S.S. rod to place 30 x 30 cm ceramic tiles. Stand will be removable |
| Stirrer is fitted on side of the bath, which allows obstruction free usage of working area. | |
| Overall Dimensions | 970 X 630 X 710(L X W X D) mm |
| Weight (Approx) | 54 kg |




