UNIVERSAL TRIAXIAL CELL
For testing of cylindrical specimens of 38mm, 50mm, 75mm, and 100mm diameter with corresponding length to diameter ratio 1:2 as per IS:2720 part XII.
VACUUM OVEN
Double walled, working chamber of cylindrical design made of S.S.316 mirror polished and outside made of S.S.304. The door is of S.S. with center glass window for viewing without opening the door. Temp.controlled from 50°C - 200°C by AUTO TUNING PID Digital Temp. indicating controller, complete with Vacuum gauge, vacuum release valve, a removable shelf but without vacuum Pump. Working on 230 V AC Single phases. Both Inner SS Model and GMP Model are available with us.
CBR/PROCTOR RAMMER-2.6 KG
As per IS:2720 and IS:9198.
PROCTOR COMPACTION RAMMER-4.9 KG
As per IS:2720 (Part VIII) and IS:9198.
SOIL HYDROMETER-(ASTM D422)
The hydrometer test is used to measure the distribution of fine particles (clay and silt) in soils that are too small to be measured accurately using sieves. It is used to determine the percentage of different particle sizes, usually in the range below 75 μm (silt and clay). As per ASTM D422, AASHTO T88, IS 2720 (Part-IV)
RELATIVE DENSITY APPARATUS
The relative density test apparatus, as per IS 2720 (Part 14) and equivalent international standards such as ASTM D4253 and ASTM D4254, is used to determine the relative density (or density index) of granular soils. This test helps measure the in-situ density of granular soils (such as sands and gravels) in relation to their maximum and minimum densities, providing essential data on soil compactness and potential settlement behavior.
COMPACTION FACTOR APPARATUS - IS 1199
AS PER IS: 5515: 1199. The apparatus consist of two conical hoppers and a cylinder, mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trap doors for release and during the fall of the material. Complete with trowel and tamping bar 0‑60 cm long X 16mm dia.
TAMPING BAR - IS:516 PART 6
A straight compacting bar made of steel having a rectangular shape of approximately 25 mm × 10 mm, a length of approximately 600 mm and with a ramming face square with the axis.
VIBRATING HAMMER - PORTABLE
Used for the compaction of concrete specimens. Using the appropriate tamping foot, it can also be used for compacting concrete cube. As per MORTH Section 903.5.1.1., the hammer will be fitted with a square or rectangular foot having an area between 7500 to 14000 sq.mm.
AUTOCLAVE FOR SANITARY WARE-
Compliance with following International Standards - ISO - 10545 (Part 9), IS - 13630.
ELECTROMAGNETIC SIEVE SHAKER
An electromagnetic sieve shaker is a sophisticated laboratory instrument used primarily for particle size analysis by utilizing a set of standardized sieves. This device is essential in fields such as construction, pharmaceuticals, food processing, and materials science.
