TENSILE TESTING MACHINE FOR HDPE BAG - 250 KGF (2.5 KN)
Computerized Tensile Strength testing machine having capacity of 0‑250 Kgf (2.5 KN) (2500 N). Supplied complete with dedicated software program. Equipped with ball screw, Induction Motor & drive (for speed variation 50mm/min to 300mm/min) along with encoder to measure the elongation using pair of grips. As per IS:11761 -1997 / IS:11652-2000 / IS 12154 / IS:16709-2017
CONE DROP TESTER FOR GEOSYNTHETIC (DYNAMIC PERFORATION TESTER)
Mainly used to measure the puncture strength as well as the fabric quality to withstand aggregate penetration. As per EN ISO 13433 (2006), BS 6906 (Part 6), EN 918
EIGHT CELL RCPT
The Rapid Chloride Permeability Test (RCPT) evaluates the resistance of concrete to chloride ion penetration, as per ASTM C1202, AASHTO T277, and equivalent standards. This test measures the electrical charge (in coulombs) passed through a concrete sample over 6 hours, reflecting the material's permeability to chloride ions.
TRIAXIAL SHEAR TEST APPARATUS - FOR 38MM DIA SPECIMEN - FOR UU, CD AND CU.
As per (IS:2720 Part XI & XII ) for determining the shear strength parameters of saturated soils from triaxial compression shear tests conducted under consolidated undrained conditions with measurements of pore water pressures. The Triaxial Test System provides triaxial compression tests on cylindrical undisturbed and remolded soil samples. Unconsolidated undrained (UU), consolidated drained (CD) and consolidated undrained (CU) compression tests can be carried out using this apparatus. Supplied complete with Triaxial cell for 38mm dia specimen, Loading Frame 50 KN with 6 different speeds, Proving ring 2 KN with Calibration report, Dial Gauge 0.01 X 25mm travel, Analog readout to measure pore water pressure and Air/Water Constant Pressure system with air compressor.. To work on 220/230 Volts, single phase, AC power supply. Volume Change Gauge, De-airing apparatus, Accessories for soil sample preparation, extrusion, trimming and for measurement of size, weight, water content, etc. can be supplied at extra cost .
DIGITAL VACUUM REGULATOR FOR KINEMATIC VISCOSITY BATH-FOR 4 VISCOMETERS
For Precise Measurement and Control of Vacuum at 300 mm Hg Below Atmospheric Pressure: Ideal for method ASTM D2171
CHARACTERISTIC OPENING SIZE APPARATUS-WET SIEVE OPENING SIZE TESTER FOR GEOTEXTILE-EN ISO 12956
Compliance Standards : EN ISO 12956. To determine the characteristic opening size of a Single layer geotextile or geotextile related products, using the wet sieving principle.
DIRECT READING DIGITAL PENETROMETER - FOR BITUMEN
As per IS 1203, IS 1448. ASTM D5. In addition to regular features, this model is Fitted with Micrometer differential gearing system for fine movement of penetration needle. Complete with Automatic Digital Timer, Digital Penetration indicator, Penetration cup and transfer dish. Water bath to condition the sample is available at extra cost.
DIGITAL THICKNESS GAUGE - DEAD WEIGHT TYPE - 2 KPA, 20 KPA - 0.001 X 10 MM - INSIZE - ASTM D5199
A thickness gauge is used to determine the thickness of geosynthetics and similar materials under specified pressures and conditions. The standards ASTM D5199, IS 13162 (Part 3), and EN ISO 9863-1 outline the test methods and equipment specifications required for accurate measurement.
DIGITAL DEAD WEIGHT TYPE THICKNESS GAUGE - 2/20/200 KPA - 0.001 X 12MM
This is a Precision Instrument for measuring the Thickness of Paper ,Plastic Film, Laminates, Foil or Board. A Digital dial gauge is mounted on the base with a Dead Weight on top so as to develop a uniform, reproducible constant pressure on the anvil through the foot. Various other models to suit different application also available.
APPARENT OPENING SIZE APPARATUS-ASTM D4751
Complying with ASTM D4751, BS 6906 (Part 2), IS 14294. The complete test set up essentially requires Ro-Tap Sieve Shaker, Fine sieves of 200mm diameter, Clamping arrangement, Spherical Glass beads and Electronic Balance. Here we supply only Rotap Sieve shaker. Fine Sieves, Clamping arrangement, Glass beads and Electronic Balance are essential accessories to conduct the test and are supplied at extra cost.
PERMEABILITY APPARATUS FOR GEOTEXTILE-(MANUAL OBSERVATION)-(ASTM D4491, EN ISO 11058)-CONSTANT HEAD TEST-NO LOAD CONDITION
Comprises of Main working unit mounted on Table Top Bench with back support, Upper & Lower unit made of Transparent acrylic material, Geo‑textile specimen holder assembly between Upper & Lower unit, Inlet and outlet valves with PVC Pipe network, Head differential measurement arrangement mounted on a stand, Manual observation of quantity of flow (in case of Constant Head Test).
DIRECT SHEAR APPARATUS FOR GEOTEXTILE TEST - 50 KN
As per IS:2720 (Part 39) / IS 11593. Complete with Load Frame, set of weights and Electronic outfit for load and displacement, with calibration certificate. The Instrument can be connected to PC through RS 232 interface and results can be on line transferred to PC and can be analyzed through software provided. Supplied without Computer. Suitable for operation on 415 volts, 50 Hz, 3 phase, A.C. Supply.
VICAT NEEDLE APPARATUS-ISI MARKED
For determination of consistency of standard cement paste and initial and final setting times of cement. As per IS:5513,IS-4031(PART 5), IS 4031 (PART 4)
