CONCRETE PERMEABILITY TESTER - AS PER DIN 1048 - 3 CELL UPTO 15 KG PRESSURE WITH AIR COMPRESSOR
Model Number : TM-139-D-315
Compliance Standards : IS 516 (Part 2/Sec 1) : 2018 | BS EN 12390 (PART 8). Applications : Water Permeability testing machine is at 3 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure. An operator can test both - Concrete cylinder of size 150 mm dia. X 160 mm high and cube moulds of 150 x 150 x 150 mm dimensions. Detailed specification as follows: Supplied with air compressor.
CONCRETE PERMEABILITY TESTER - AS PER IS 516 (Part 2/Sec1): 2018 - 3 CELL UPTO 15 KG PRESSURE WITH HIGH PRESSURE AIR COMPRESSOR
Compliance Standards:
IS:516 (PART2/SEC1) | BS EN 12390 (PART 8)
Applications :
Water Permeability testing machine is at 3 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure
Descriptions :
Concrete Permeability Apparatus consisting three specimen holder assemblies as per IS:516 (PART2/SEC1) with manifold assembly to hold end Pressure of 15 kg/cm2 (15 Bar) and a Pressure Gauge of 21kg/cm2 (21Bar) with another gauge of 21 kg/cm2 (21 Bar) on the panel to show the inlet pressure.
Size: 150mm dia. X 160mm high. Complete with Air Compressor.
The specimen is put into the test chamber, clamped with suitable flanges and gaskets, and then a known water pressure is applied on the specimen’s surface for a time as requested by Standard, by using a suitable air compressor (accessory). The water penetrated is measured by breaking the specimen.
Item Included:
- 3 Hp High Pressure Air Compressor With 50 Ltr Tank.
| Overall Dimensions | 720 X 1220 X 2000(L X W X D) mm |
|---|---|
| Net weight (in kg) | 135 kg |
