
KINEMATIC VISCOSITY BATH (BELOW AMBIENT)-FOR 2 VISCOMETERS-
Model Number : EIE-PTLT-109BA2
Used for determination of kinematic and instrinsic viscosity of fuels, lubricants & petrochemical raw materials at constant temperatures in accordance with ASTM D 4603 and other equivalent methods Double walled, outer chamber made of G.I. – powder coated, with removable toughened Glass window panel, inner chamber made of S.S, FHP motorized stirrer for uniform temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT-100 sensor Provided with built-in refrigeration system, Temp. range 10° C to 50° C.Control accuracy± 0.1° C. complete with Lighting attachment with long life, Low wattage lamp. Universal Viscometer holder. Tray for Viscometer ,Working on 230 V single phase.
TYPE OF BATH
Compliance with following International Standards :
ASTM D445, IS 1448 (P 25)
Application :
Used for determination of kinematic and intrinsic viscosity Of fuels, lubricants & petrochemical raw materials at constant temperatures in accordance with ASTM D 445 and other equivalent methods
Annexure:
- Microprocessor based circuitry assures precise, reliable temperature control within specified tolerances throughout the operating range of the bath i.e. 10 °C to ambient temperature.
- Dual digital displays show set and actual bath temperature
- Simple push button controls and digital display permit easy setting and monitoring of bath temperature.
- Bath accommodates 02 Nos glass capillary reversion viscometers of various types at a time
- Viewing the viscometers is made easy by glare‑free fluorescent illumination.
- Temperature control uniformity is assured by means of motorized stirrer, which provides complete circulation without turbulence.
- Frost free glass window for low temperature bath
- Control panel is mounted on a side of the bath
- Complete exterior body is finished with attractive powder coated paint
Technical Specifications of Refrigeration System :
- Refrigeration system : Emerson/Danfoss Make refrigeration system
- Compressor: Hermetically Sealed Compressor
- Condenser : Fin & Tube type Air‑Cooled Condenser
- Refrigerant : R134a
Optional Accessories At Extra Cost :
- Voltage Stabilizer(Highly recommended)
- Temperature calibration certificate as per ISO/IEC : 17025 (NABL)
- Display resolution 0.01°C with Eurotherm Make Controller
- Thermometer glass ‑ IP 30C (‑23.6 / 26.4°C x 0.05°C ) ASTM 45C:
- Glass U Tube Viscometer to be purchased at extra cost
Note
Use of RO/DM Water as a bath media is mandatory for long lasting performance of Heaters. Warranty vois in case of non compliance
Other Instruments for IV solution Preparation (Viz. Chips grinder, shaker bath, Magnetic stirrer etc. available at extra cost)
| Volume of the bath | 12 Liters capacity |
|---|---|
| Working Chamber Size | 180 L x 110W x 350 D (mm) |
| Temperature Control Range | 10 °C to Ambient |
| Temperature controller | Microprocessor based Auto‑Tune PID Digital Temp controller cum indicator |
| Temperature sensor | PT ‑ 100 Sensor |
| Temperature Display | LED Display |
| Display Resolution | 0.1 °C (Optional 0.01°C at extra cost) |
| Temperature Accuracy | ± 0.1 °C (@ 25°C) |
| Heater | Immersion heater |
| Viewing window | Vacuum glass window for frost free viewing below 5°C range |
| Stirrer | 1400rpm motor with stirrer for uniform Temperature |
| Stirrer Motor | Of reputed make |
| Inner chamber material | Stainless Steel S.S. ‑ 304 Grade with tempered glass |
| Exterior body | Fabricated from mild steel material, which is powder coated in attractive shades |
| Illumination | PL Lamp |
| Accessories | Supplied complete with Viscometer holders |
| Accommodates | 02 Nos of viscometers |
| Electrical Requirements | 220 volts, 50 Hz, AC Supply |
| Power Consumption | 1.5 KW |



