NABL Accredited Calibration Laboratory

TWIN DISTILLATION APPARATUS-REFRIGERATED-(ASTM D86)

Model Number : EIE-149TDR

As per ASTM D86, IS 1448 (P: 18) & IP 123. Fitted with a built in step less variable heat control copper coil variac and Digital Temp. indicator with refrigeration facility. Supplied with a 125 ml distillation flask, 100 ml receiver flask and IP 5C & IP 6C Glass Thermometers. Further specifications detailed as under.

REFRIGERATION TYPE

Compliance Standards:

ASTM D86, IS 1448 (P: 18) , ISO 3405 & IP 123 

Applications:

For distillation of motor gasoline, aviation turbine fuel, naphtha, kerosene, gas oil, distillate fuel oil and other product as per group 1,2,3 & 4.

Details:

  1. It will be so constructed that both distillation flask & receiver could be seen from front only.
  2. The instrument will be constructed with fully insulated stainless steel condenser and heater unit.
  3. Heater unit will include flask support platform, inspection window, 1000 w heater with step less variable control and geared unit for infinitely adjustable in height of the heating shield with provision for locking and convenient knob on the front. The heat variable controller will be made of copper coil variac type.
  4. The copper coiled variac heater will be kept/fitted internally and will be provided with output voltage indicator.
  5.  It will be provided with illuminated white back-ground for easy viewing of fractions in receiver side during test.
  6. The apparatus will be twin unit set with left-hand right-hand combination and will include CFC free mechanical refrigerated bath, which could be maintained at 0- 60 °C.
  7. The apparatus will be so constructed that it will meet all dimensional specification as per IS: 1448 (P: 18) / IP 123.
  8. The system will run on Indian supply of 220/230 volts, single phase, 50 Hz AC mains.

Flask Support # Bottom:

First Boards made of ceramic or other heat resistant material not containing asbestos, 3 to 4 mm in thickness shall rest upon the platform(containing heating coil). The board immediately rest on the platform will have a central opening 76 to 100 mm in diameter.

Flask Support # Top Board (ceramic):

Second Boards made of ceramic or other heat resistant material not containing asbestos, 3 to 4 mm in thickness. The second or flask support board shall have a central opening of 38 / 50 mm.

Refrigeration facility:

Condenser Bath & metal tubing: The equipment will have a refrigerated condensing unit, capable of maintaining the temperature from 0 to 60°C. Condenser bath will be made of SS (18/20 SWG) with fine machine finish. The condenser will have seamless non-corrosive metal tubing, 560 ± 5 mm in length with outside Dia of 14 mm and wall thickness of 0.8 to 0.9 mm. Tubing to be built within condenser as mentioned in the test method. The temperature of the bath to be indicated by a digital display. Capacity of the bath: not less than 5.5 fits. of cooling medium.

Wiring:

The electrical wires, insulating material/ceramic beds, switches used in the equipment will be of high quality and as per BIS standards wherever applicable. Power connection: 15 A metal clad plugs to connect to main socket

Distillation Flask

Made with heat resistant borosilicate glass material

Volume : 125ml capacity

Dimensions as per ASTM D86

supplied with Teflon cork or silicon rubber cork

Receiving flask

Made of borosilicate glass material

Volume : 100 ml capacity

Graduation : At every 1 ml intervals

Glass thermometers

IP‑5C and IP‑6C Thermometers can be supplied with Calibration certificate, traceable to National Standard.

Twin Distillation Apparatus