
ULTRA LOW TEMP. KINEMATIC VISCOSITY BATH (-80˚C TO AMBIENT)
Model Number : EIE-410ULGP80
Suited for 2 Viscometer at a time. Compliance with following International Standards : ASTM D445, IS 1448 (P 25).
WORKING TEMPERATURE RANGE
Compliance with following National/International Standards :
ASTM D445, IS 1448 (P-25)
Application :
Used for determination of kinematic and intrinsic viscosity Of fuels, lubricants & petrochemical raw materials at constant temperatures in accordance with ASTM D 4603 and other equivalent methods
Annexure :
- Microprocessor based circuitry assures precise, reliable temperature control within specified tolerances throughout the operating range of the bath i.e. -80 °C to ambient temperature.
- Dual digital displays show set and actual bath temperature
- Simple push button controls and digital display permit easy setting and monitoring of bath temperature.
- Bath accommodates 02 Nos glass capillary reversion viscometers of various types at a time
- Viewing the viscometers is made easy by glare‑free fluorescent illumination.
- Temperature control uniformity is assured by means of motorized stirrer, which provides complete circulation without turbulence.
- Frost free glass window for low temperature bath
- Control panel is mounted on a side of the bath
- Complete exterior body is finished with stainless steel AISI304.
Technical Specifications of Refrigeration System:
- Refrigeration system : Cascade refrigeration system
- Compressor : Hermetically Sealed Compressor
- Condenser : Fin & Tube type Air‑Cooled Condenser
- Refrigerant : R404a
Optional Accessories At Extra Cost :
- Voltage Stabilizer (Highly recommended)
- Temperature calibration certificate as per ISO/IEC : 17025 (NABL)
- Glass thermometer - ASTM/IP as required for the test
- Glass U Tube Viscometer to be purchased at extra cost
- viscometer rack for safe keeping of U Tube Viscometer - can accommodate 6 tubes on a bench top
Note
Bath media will be available at extra cost.
| Bath | |
|---|---|
| Dimensions of bath | 300 x 260 x 300 mm (L x W x D) |
| Volume of the bath | 23 Liters capacity |
| Temperature Control | Range : -80 °C to ambient |
| Temperature controller | Microprocessor based Auto Tune PID Digital Temp controller cum indicator |
| Temperature sensor | PT 100 Sensor |
| Temperature Display | LED Display |
| Display resolutions | 0.1 °C |
| Temperature Accuracy | ± 0.5 °C |
| Heater | Immersion heater |
| Viewing window | Vacuum glass window for frost free viewing below 5°C range |
| Stirrer | 1400rpm motor with stirrer for uniform Temperature |
| Stirrer Motor | Of reputed make |
| Inner chamber | made from Stainless Steel S.S. 304 Grade |
| Exterior body | made from Stainless Steel S.S. 304 Grade |
| Illumination | PL Lamp |
| Accessories | Supplied complete with Viscometer holders |
| Accommodate | 02 Nos of viscometers |
| Bath Media | ISOPROPYL ALCOHOL or suitable heat transfer fluid (To be supplied by user) |
| Electrical Supply | 220 volts, 50 Hz, AC Supply |
| Power Consumption | 2 KW |
| Refrigeration System | |
| Refrigeration | Emerson/Danfoss Make refrigeration system |
| Compressor | Hermetically Sealed Compressor |
| Condenser | Fin & Tube type Air Cooled Condenser |
| Cascade System | For below -80°C ranges |
| Refrigerant | R404a |


