NABL Accredited Calibration Laboratory
HIGH TEMP. FURNACE-12" X 6" X 6"-1400°C

HIGH TEMP. FURNACE-12" X 6" X 6"-1400°C

Model Number : EIE-108H14DP7

Light weight with ceramic wool insulation. The outer casing made of thick mild steel sheets painted attractively. Heating Chamber consist of grooved refractory bricks in which heating elements are inserted in and are easily replaceable. Temperature controlled by Dual display microprocessor based Digital temperature indicator cum controller with R type sensor. compensating cable etc. working on 440 V. Max. Temperature.: 1400 °C. & Working Temp.: 1350 °C.

FURNACE WORKING TEMPERATURE RANGE

Construction Details:

  1. Table mounting type
  2. Aesthetic exterior appearance
  3. Fabricated from Mild Steel Material  
  4. Box type fabrication in a composite assembly of two sections 
  5. Powder coated in attractive shades.
  6. The heating cavity is located on the left of the assembly, while the control panel with electrical gearing is positioned on the right.

Refractory:

  1. Internal refractory lining made of Hot Face,, High Alumina, Refractory Fiber insulation backed by low heat capacity.
  2. Ceramic fiber insulation of different grades with fan cooling for low skin temperature.

Heating Element:

Furnace is Equipped with Matched set of Silicon Carbide Heating Elements, which are horizontally mounted, radiate directly on both sides of the Heating Cavity to derive symmetrical heat distribution.

Optional Accessories (at extra cost)

  1. Hour Meter
  2. Over temp.protection with audio alarm
  3. Data Logger blind - Multi point recorder with software
  4. Safety door switch
  5. Programmable Temp.controller/Profile Controller with 16 Profiles (Programs) of 16 Segments Each (8 Ramp + 8 Soak)

Note:

Silica Crucible with Lid / Quartz Crucible with Lid / Platinum Crucible with Lid / Crucible tong / Protective thermal hand gloves and Electronic Weighing Balance (0.1 mg or 1 mg sensitivity) may also be required and are available at extra cost.