NABL Accredited Calibration Laboratory

REFRACTORY FURNACE - 12" X 8" X 8"-1200°C -GMP

Model Number : EIE-108DG12

Light weight with ceramic wool insulation. The outer casing made of thick Stainless steel-matt finished. Heating chamber consist of grooved refractory bricks in which heating elements are inserted in coil form and are easily replaceable. Temperature controlled by Dual display microprocessor based Digital temperature indicator cum controller with K type sensor. compensating cable etc. working on 440 V .Max. Temperature.: 1200 °C & Working Temp.: 1150 °C. Detailed Specification as follows:

TYPE OF FURNACE

Salient Features :

  1. Horizontal, front loading type
  2. Improved model
  3. Exterior body made of Stainless Steel ‑ S.S. 304 Grade
  4. Ceramic fiber wool insulation (instead of brick insulation)
  5. Ceramic fiber wool insulation results in weight and size reduction of furnace.
  6. The weight and size of the furnace is (1/4 times )and 30% less respectively as compared to brick furnace.
  7. The heat up time is less
  8. Heat loss is very low‑resulting in power saving
  9. Supplied with calibration certificate for Digital temperature controller cum indicator
  10. Supplied complete with IQ, OQ, PQ Documentation and instruction manual

Vent Port :

  1. Built in vent port for removal of noxious gases etc preferably with a provision of connecting the extension pipe with vent lid should be air tight for Volatile Matter analysis.

Calibration port (If required by indenter) :

  1. Provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment

Safety Features :

  1. Thermocouple breaks protection to cut power to the heating element in order to prevent thermocouple failure runway condition.

Standard Fittings supplied with the instrument :

  1. Compensating cable
  2. Indicating lamps
  3. Indian Standard Power plug & cord

Optional Accessories (at extra cost)

  1. Hour Meter
  2. Over temp. protection with audio alarm
  3. On site Validation services
  4. Data Logger blind - Multi point recorder with software
  5. Safety door switch
  6. Programmable Temp. controller/Profile Controller with 16 Profiles (Programs) of 16 Segments Each (8 Ramp + 8 Soak)

Note:

Silica Crucible with Lid / Quartz Crucible with Lid / Platinum Crucible with Lid / Crucible tong / Protective thermal hand gloves and Electronic Weighing Balance (0.1 mg or 1 mg sensitivity) are available at extra cost. Price on request.

LABORATORY FURNACE