MELTING POT- FOR CAPPING SET
For melting the capping compound.
RUBBER CONTENT OF CRUMB RUBBER MODIFIED BITUMEN- SOXHLET METHOD
As per As per ASTM D6814, AASHTO M-320, AUSTROADS TEST METHOD AGPT/T142. To determine the rubber content of crumb rubber modified bitumen (CRMB) using a Soxhlet extraction method. The rubber in crumb rubber modified bitumen is extracted using a suitable solvent in a Soxhlet extractor. The non-rubber component (bitumen) dissolves in the solvent, leaving the rubber residue, which is then weighed to determine the rubber content.
CEMENT CUBES CURING TANK WITH HEATING & COOLING : 12 CUBES
Curing of cement cubes is critical to ensure the accurate assessment of the compressive strength of cement as per the prescribed standards. Clause 6.3 of IS: 4031 (Part 6) and similar guidelines from other international standards emphasize specific curing procedures to ensure reproducibility and reliability of test results.
CEMENT CUBES CURING TANK WITH HEATING & COOLING : 24 CUBES
Curing of cement cubes is critical to ensure the accurate assessment of the compressive strength of cement as per the prescribed standards. Clause 6.3 of IS: 4031 (Part 6) and similar guidelines from other international standards emphasize specific curing procedures to ensure reproducibility and reliability of test results.
CEMENT CUBES CURING TANK WITH HEATING & COOLING : 48 CUBES
Curing of cement cubes is critical to ensure the accurate assessment of the compressive strength of cement as per the prescribed standards. Clause 6.3 of IS: 4031 (Part 6) and similar guidelines from other international standards emphasize specific curing procedures to ensure reproducibility and reliability of test results.
CEMENT CUBES CURING TANK WITH HEATING & COOLING : 100 CUBES
Curing of cement cubes is critical to ensure the accurate assessment of the compressive strength of cement as per the prescribed standards. Clause 6.3 of IS: 4031 (Part 6) and similar guidelines from other international standards emphasize specific curing procedures to ensure reproducibility and reliability of test results.
CEMENT CUBES CURING TANK WITH HEATING & COOLING : 200 CUBES
Curing of cement cubes is critical to ensure the accurate assessment of the compressive strength of cement as per the prescribed standards. Clause 6.3 of IS: 4031 (Part 6) and similar guidelines from other international standards emphasize specific curing procedures to ensure reproducibility and reliability of test results.
CEMENT CUBES CURING TANK WITH HEATING & COOLING : 500 CUBES
Curing of cement cubes is critical to ensure the accurate assessment of the compressive strength of cement as per the prescribed standards. Clause 6.3 of IS: 4031 (Part 6) and similar guidelines from other international standards emphasize specific curing procedures to ensure reproducibility and reliability of test results.
WET SIEVING APPARATUS - IS : 4031 (PART-15)
As per IS : 4031 (PART-15). Wet Sieving Apparatus . with Pressure Gauge, Spray Nozzle fitting to attach the Apparatus to a Water Source.
SPLITTING TENSILE ATTACHMENT FOR THIN BED MORTAR OF AAC BLOCKS - (ASTM C1660, ASTM C1006)
To perform splitting tensile strength tests in accordance with ASTM C1006 and ASTM C1660, a specialized attachment is required for your compression testing machine. This attachment typically includes steel rods that apply a line load along the specimen's surface, inducing tensile stress until failure.
COMPRESSION FRAME JIG ASSEMBLY AS PER ASTM C109
This jig is designed for testing of 40 x 40 x 160mm cement prism after breaking in Flexure and also can be adapted with 50mm platen to test 2” or 50mm mortar cement cube specimen. This jig can be fitted to Compression Test Machine.
