PARTICLE CHARGE TESTER - (ASTM D244) - WITH ACCESSORIES
EN 1430, ASTM D244
INDIRECT TENSILE STRENGTH OF MARSHAL TEST SPECIMEN
Tensile Splitting Device (Lottman Breaking Head) – ASTM D6931 Designed for 4" (100 mm) and 6" (150 mm) Marshall compacted bituminous specimens, complete with loading strips. Supplied with the breaking head assembly, guide rods, and loading strips.(Marshall machine, water bath, and oven are not included.)
CAMBER BOARD - FOR ROAD CONSTRUCTION
A camber board is a simple tool used in road construction to ensure the correct camber (slope) of the road surface during its construction. The camber is the slight transverse slope provided to the surface of the road to facilitate drainage. The camber board is typically a metal frame, shaped to match the required camber profile (convex or straight slope) and used by road workers to level the road surface during the laying of materials like asphalt or concrete.
DENSITY CUP-STAINLESS STEEL-83.2 ML-ASTM D6937-SPECIFIC GRAVITY OF BITUMEN EMULSION
Used for the determination of the density of emulsified asphalt (bitumen emulsion) at 25°C (77°F). The density of the bitumen emulsion is used to calculate its specific gravity and is important in determining its application in construction, particularly in ensuring that the correct amount of material is used in road construction or other applications.Compliance standards - ASTM D6937.
MARSHAL STABILITY TESTING MACHINE
Complies with following International Standards - ASTM D6927, ASTM D1559. Application - It is used to measure the resistance to plastic flow of cylindrical specimens of bituminous mixture loaded on the lateral surface.
BENTONITE SLURRY SAMPLER - 50 MTR.
Slurry-Sampler is designed for capturing samples of drilling fluid from any specific depth within an excavation or borehole. This special sampler assures slurry samples taken produce a representative sample for proper test results. The use of a sampler is important for exact depth confirmation of viscosity, specific gravity, pH, and sand content data collection in the drilling fluid.
AUTOMATIC COMPACTOR FOR MARSHAL TEST
It is a motor driven mechanical compactor useful for compaction in to 4" & 6" dia Marshal moulds. It is fitted with a compaction rammer weighing 4.5 kg & 10 kg/ 200 gm. with a free fall of 457 mm. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. Supplied without Moulds. - Available at extra cost
MUD BALANCE-ASTM D4380
The Mud Balance is used to determine the density (weight per unit volume) of drilling fluids, slurries, and cement as per ASTM D4380. It is essential for monitoring and controlling the density of drilling muds used in oil and gas exploration, ensuring proper wellbore stability and preventing blowouts. The Balance also matches API Recommended Practice 13B-1 (for Water-Based Drilling Fluids), API Recommended Practice 13B-2 (for Oil-Based Drilling Fluids), ISO 10414-1 (Petroleum and natural gas industries – Field testing of drilling fluids)
COMPACT LOADING FRAME - 100 KN
Primarily used for Marshal test. It will be motorized with a uniform vertical movement of 50.8 mm/minute (2"/minute) suitable for operation 230 volts & 50 cycles single phase A.C. supply. It will be fixed with a reversible motor, reversing switch & limit switches to restrict the traveled capacity to 100 KN. As per ASTM D1559. Digital version with PC software also available
SIEVE SEGREGATION TEST SET - IS 1199 (Part 6)
The Sieve Segregation Test, also known as the Set-Stability Test, is used to evaluate the segregation resistance of self-compacting concrete (SCC). This test helps determine the uniformity of SCC by assessing its ability to maintain homogeneity and resist segregation, which is critical to ensure the quality and performance of the concrete. As per IS 1199 (Part 6) : 2018, EN 12350-11: Testing fresh concrete – Part 11: EFNARC Guidelines for Self-Compacting Concrete.
CONSTANT TEMPERATURE WATERBATH FOR MARSHAL TEST WITH DIGITAL CONTROLLER
Double walled water bath. Inner chamber is made of mirror polished stainless steel material S.S. ‑ 304 Grade, Exterior body is fabricated from Mild steel material, which is powder coated in attractive shades. Temperate ranges from : 5 °C above ambient to 100 °C, Temperature accuracy will be of ± 0.5 °C. Detailed specification as follows:
U BOX
U BOX is one of the apparatus of the SCC (Self Consolidating Concrete) test accessories. These tests are used to determine the flowability and passing ability of Self Consolidating Concrete (SCC) as defined in ASTM C1621. Passing ability refers to the ability of SCC, under its own weight (without vibration), to flow into and completely fill the spaces within an intricate framework, containing obstacles such as reinforcement bars.
STORAGE PLATE FOR 4 INCHES DIA MARSHAL SPECIMEN
To store 6 pieces of Marshall Specimen. Specimen dia : 100 mm (4").
MARSH CONE FUNNEL - ASTM D6910
This test can be performed in the laboratory, or used in the field to assess the apparent viscosity of a clay slurry for quality control purposes. The most commonly used slurry is a bentonite clay slurry. Made of Virgin Plastic. As per API RP 13B-1/ASTM D6910/ ISO 10414-1:2008
J RING TEST APPARATUS - ASTM C1621/1621M‑06
Made of Mild steel powder coated or spray painted. Also available in all S.S. construction : Price on request
V FUNNEL TEST APPARATUS
V Funnel is one of the apparatus of the SCC (Self Consolidating Concrete) test. Primarily used for viscosity determination. This test also gives the filling ability of the concrete.
L BOX APPARATUS-FOR SCC TEST
Made of Mild steel - powder coated or spray painted, Also available in all S.S. construction or all acrylic construction
SEED GERMINATOR - REFRIGERATED - INNER S.S. - 90 X 60 X 60 CM - WITH HMI, PLC & ILLUMINATION CONTROL
Seed Germinators are used for germination & biological studies, which includes UV, Fluorescent lights coupled with 24 hours cyclic timer for lights on/off regulation.
Box Compression Tester
Digital Display - (Auto Calculation). Compliance standards IS : 7028 (Part ‑ VI), IS : 7028 (Part ‑ IX), ASTM D4577, ASTM D642, TAPPI : T804.
Bursting Strength Tester
Fully Automatic & Digital Economy Model for Bursting Strength Test of Corrugated Box or Corrugated Paper
