GILLMORE NEEDLE APPARATUS - (ASTM C266, AASHTO T154)
The Gilmore needle test determines the initial and final setting times of cement paste. The Instrument measures the time required for the cement paste to stiffen under standardized conditions using two needles: Initial set needle (smaller diameter) Final set needle (larger diameter). The test provides critical information about the behavior of cementitious materials during hydration and is crucial for construction scheduling. As per ASTM C266, AASHTO T154, ASTM C141, ASTM C91.
CEMENT MORTAR FLEXURAL TESTING JIG - EN 196, EN 1015
As per EN 196-1, EN 1015-11, IS:4031 (Part 8)
CYLINDRICAL MEASURE FOR AIR CONTENT OF CEMENT MORTAR
As per IS:11263. Made of stainless steel.
GLASS BEADS FOR AOS TEST OF GEOTEXTILE - ASTM D4751
Glass Beads for AOS Test of Geotextile – ASTM D4751, used for determining the Apparent Opening Size (AOS) of geotextile materials in accordance with ASTM D4751 standards.
LIME REACTIVITY TEST APPARATUS - EN 459-2, ASTM C110
As per EN 459-2, ASTM C110, ASTM C91, ASTM C5. This apparatus includes a container for mixing lime with water, a Digital thermometer with thermocouple to monitor temperature changes and a stirrer to ensure consistent mixing.
MOHS' HARDNESS TEST KIT - FOR CONCRETE & CERAMIC TILES
While the Mohs' Hardness test was developed originally for testing minerals, the same concept can be applied to industrial materials. Use this kit for "scratch testing" substances to determine their Hardness according to the Mohs' Hardness scale, which ranges from 1 to 10, where Diamond is the hardest at 10, while Talc is softest at 1. How do you use the hardness picks? Simply scratch a smooth surface of your material with the picks of various indicated hardness. As an example, if a No. 5 pick scratches the material, but a No. 4 pick does not, then your material’s hardness is 4.5.
REID VAPOUR PRESSURE TEST APPARATUS WITH ACCESSORIES*-ASTM D323, ASTM D1267
Reid Vapour Pressure Test Apparatus IP 69 & IS 1488 (P:39) Bath for single test with FHP Stirrer and with Digital temp. controller and motorized stirrer, with 1 No.each Vapour Pressure Bomb consisting of One air chamber and one gasoline chamber with cock.NP Pressure Gauge 0‑15 PSI or 0‑30 PSI or 0‑45 PSI or 0‑100 PSI (Any one), Glass Thermometer IP 23 C (34 ‑ 42 deg C X 0.1 deg C).
STANDARD PENETRATION TEST APPARATUS(SPT)
Compliance with ASTM D‑1586, IS : 2131. Complete set up consists of Split spoon sampler (Head, Split barrel & shoe) : 1 No, Drive Monkey weight 63.5 kg: 1 No, Sampling drill A‑rod 1.5 meter long : 3 No, Guide Pipe Assembly : 1 No, Tripod 5 meter long with pulley assembly : 1 No, Rope for hammer: 10 Meter.
