BENTONITE SLURRY SAMPLER - 50 MTR.
Slurry-Sampler is designed for capturing samples of drilling fluid from any specific depth within an excavation or borehole. This special sampler assures slurry samples taken produce a representative sample for proper test results. The use of a sampler is important for exact depth confirmation of viscosity, specific gravity, pH, and sand content data collection in the drilling fluid.
HEAT OF HYDRATION APPARATUS WITH DIGITAL THERMOMETER - IS 4031, IS 11262
Used to determine the heat of hydration of low heat Portland and hydraulic cement. The instrument is used for determining heat of hydration of cement by measuring difference between heat of solution of dry cement and heat of solution of a separate sample partially heated for 7 days & 28 days. As per IS 4031, IS 11262. Advance version with Datalogger, PC Connectivity with software and temp.resolution of 0.001°C is also available
LE-CHATLIER FLASK
Used for measurement of specific gravity of hydraulic cements. As per ASTM C188, AASTHO T133, EN 196-6, IS :4031 (Part XIII)
LE-CHATLIER MOULD (FOR SOUNDNESS TEST)
The soundness test determines the ability of cement or lime to retain its volume after setting. Unsound materials can expand excessively after hardening, leading to cracks or disintegration in structures. This test is critical for ensuring structural durability and reliability. As per IS 4031 (Part 3), ASTM C151, EN 196-3:
CONE PENETROMETER FOR CEMENT MORTAR - IS 2250
As per IS 2250-1965 (Annex A),For determining the consistency of masonry mortar.
CEMENT MORTAR FLEXURAL TESTING JIG - EN 196, EN 1015
As per EN 196-1, EN 1015-11, IS:4031 (Part 8)
SULPHIDE SULPHUR TEST OF SLAG CEMENT WITH ACCESSORIES
As per IS:4032, clause 6.12. Complete with necessary glassware's and heating unit but without chemicals and titration assembly. Source of compressed air has to be arranged by the user.
ASSEMBLY OF APPARATUS FOR DETERMINATION OF CARBONATE IN LIME
ASSEMBLY OF APPARATUS FOR DETERMINATION OF CARBONATE IN LIME AS PER IS 1514:1990 (R.A.2020)
JOLTING APPARATUS (VIBRATING TABLE FOR CEMENT MORTAR)
Used to compact rectangular 40 x 40 x 160mm of port land and pozzolana cement mortar prism specimens for determining the transverse strength. As per IS 10078 :1982, EN 196‑1, EN ISO 679
ASSEMBLY OF APPARATUS FOR DETERMINATION OF CARBON DIOXIDE IN LIME
Assembly of Apparatus for determinaion of carbon dioxide in building lime: IS 6932-2(1973) standard ( Part II )
WATERBATH FOR SPECIFIC GRAVITY TEST OF CEMENT
The water bath in general will fulfill the requirements of IS:4031 (Part 11), ASTM C188, EN-196 - Method of Physical tests for hydraulic cement (Determination of Density), Supplied without Le-Chatelier Flasks.
WET SIEVING APPARATUS - (ASTM C430)
The wet sieving process under ASTM C430 is used to determine the fineness of hydraulic cement and fly ash using the wet sieving method. This test helps quantify the residue of cement particles retained on a specified sieve after washing, providing insights into the particle size distribution of the cement. The retained material on the sieve gives an indication of the fineness level, with finer cements generally associated with better reactivity and early strength development.
CONE FOR FLUIDITY TEST AS PER BS EN 445/ EN 447:2007
The fluidity of the grout, expressed in seconds, is a measure of time necessary for a stated quantity of grout to pass through the orifice of the cone, under the stated conditions.
TENSILE TESTING MACHINE FOR HDPE BAG - 250 KGF (2.5 KN)
Computerized Tensile Strength testing machine having capacity of 0‑250 Kgf (2.5 KN) (2500 N). Supplied complete with dedicated software program. Equipped with ball screw, Induction Motor & drive (for speed variation 50mm/min to 300mm/min) along with encoder to measure the elongation using pair of grips. As per IS:11761 -1997 / IS:11652-2000 / IS 12154 / IS:16709-2017
VICAT NEEDLE APPARATUS-ISI MARKED
For determination of consistency of standard cement paste and initial and final setting times of cement. As per IS:5513,IS-4031(PART 5), IS 4031 (PART 4)
BLAIN AIR PERMEABILITY APPARATUS - ISI MARKED
Compliant with IS:4031 (Part 2), IS 5516, ASTM C204, and EN 196-6, this Blaine Air Permeability Apparatus precisely determines the fineness of cements, pozzolanas, and other fine powders by measuring their specific surface area. Constructed with high-quality materials and fitted with essential accessories, it ensures reliable results for quality testing.
DIBUTYL PHTHALATE LIQUID
Dibutyl phthalate (DBP) is used as the manometer liquid in the Blaine air permeability test because its specific physical and chemical properties satisfy the exact requirements outlined in standards like ASTM C204 and IS 4031
