CYLINDRICAL MEASURE FOR AIR CONTENT OF CEMENT MORTAR
As per IS:11263. Made of stainless steel.
LIME REACTIVITY TEST APPARATUS - EN 459-2, ASTM C110
As per EN 459-2, ASTM C110, ASTM C91, ASTM C5. This apparatus includes a container for mixing lime with water, a Digital thermometer with thermocouple to monitor temperature changes and a stirrer to ensure consistent mixing.
STANDARD PENETRATION TEST APPARATUS(SPT)
Compliance with ASTM D‑1586, IS : 2131. Complete set up consists of Split spoon sampler (Head, Split barrel & shoe) : 1 No, Drive Monkey weight 63.5 kg: 1 No, Sampling drill A‑rod 1.5 meter long : 3 No, Guide Pipe Assembly : 1 No, Tripod 5 meter long with pulley assembly : 1 No, Rope for hammer: 10 Meter.
ASPHALT RECOVERY APPARATUS-BY ABSON METHOD-ASTM D1856
The Abson Method is designed to recover asphalt from bituminous paving mixtures for further testing without altering its original properties. The recovered asphalt can be tested for properties like penetration, ductility, and viscosity Compliance Standards : ASTM D1856, AASHTO T170, AASHTO R59, EN 12697-3, BS 598-102. Also known as ABSON Method.
SAND EQUIVALENT VALUE TEST APPARATUS
The Sand Equivalent Value Test is a method used to determine the cleanliness of fine aggregates by measuring the proportion of sand to clay-like materials in the sample. As per IS : 2720 (Part‑37), ASTM D2419, AASHTO T176, EN 933-8.
SULPHIDE SULPHUR TEST OF SLAG CEMENT WITH ACCESSORIES
As per IS:4032, clause 6.12. Complete with necessary glassware's and heating unit but without chemicals and titration assembly. Source of compressed air has to be arranged by the user.
UNCONFINED COMPRESSION TESTER-(MOTORISED)-(IS 2720-PART X)
The Unconfined Compression Test is widely used to determine the unconfined compressive strength (UCS) of cohesive soils, which provides insight into the soil’s ability to withstand load without lateral support. The primary goal of this test is to determine the unconfined compressive strength of soil, which is a measure of its resistance to axial loading without any confining pressure. It is particularly applicable for cohesive soils (e.g., clay) that are fully saturated. As per IS : 2720 (PART‑X), IS : 4332 (PART‑V)
Theoretical Density Meter With Vacuum Pump - ASTM D2041-03
Used for determining the theoretical maximum specific gravity of uncompacted bituminous paving mixtures. The set consist of two vacuum containers, vacuum pump with digital vacuum indicator, vibratory table and control panel. ( Commonly referred as "Rice test")
PAN MIXER-40 LTRS-WITH REMOVABLE PAN, TROLLEY AND STAND
Suitable to Cast 9 Cube Mould of 15 cm at a Time in single batch. Detailed specifications mentioned in the long description. The machine is capable to caste second batch immediately after first batch as the first pan can be removed with trolley and placed on the table. And with the help of second pan, second mix design can be started.
SAND EQUIVALENT MECHANICAL SHAKER - MOTORIZED (ASTM 2419)
The sand equivalent test provides insight into the cleanliness and quality of fine aggregates. The sample is typically prepared by removing larger particles and then mixing with a solution to create a suspension. The suspension is shaken to distribute the fine particles uniformly throughout the solution. A mechanical shaker is recommended for consistent, repeatable and time-efficient results. With Digital RPM indicator and Digital timer. As per ASTM D‑2419, AASHTO T‑176, T‑210, IS:2720(P-37)
WATER RETENTION TEST APPARATUS - (ASTM C1506, ASTM C110)
The apparatus is used in specification tests of masonry cement and physical testing of quicklime and hydrated lime. As per ASTM C110, ASTM C91, ASTM C1506, ASTM C207
LENGTH COMPARATOR -IS 9459, IS 4031, ASTM C490
Compliance Standards: IS 4031, IS 9459, ASTM C452, ASTM C151, ASTM C490, The apparatus consist of an adjustable length comparator with Digital dial micrometer of 0.001 X 10 mm, together with a suitable reference bar.
DYNAMIC CONE PENETRATION TEST APPARATUS (DCPT) ASTM D6951
The Dynamic Cone Penetrometer (DCP) test is used to assess the structural properties of soil, granular materials, and pavement layers by measuring the rate of penetration of a cone under repeated impacts. As per ASTM D6951, IRC:SP:72
PORTABLE SWELL TEST APPARATUS WITH PROVING RING DIAL GAUGE
Dr. R.S. Kutti, a renowned geotechnical engineer, developed a portable swell test apparatus to assess the swelling characteristics of expansive soils. This lightweight and portable device enables on-site evaluation of soil swelling potential, which is crucial for construction projects involving expansive clays.
LIME REACTIVITY CABINET
Conditioning lime in a humidity chamber prior to physical testing is critical to ensure accurate, reproducible, and reliable test results. This step minimizes variations caused by moisture fluctuations in lime, as lime’s properties are highly sensitive to environmental conditions, including humidity. Lime reactivity chambers are available in various sizes covering wide temp. and humidity range.
ASSEMBLY OF APPARATUS FOR DETERMINATION OF CARBONATE IN LIME
ASSEMBLY OF APPARATUS FOR DETERMINATION OF CARBONATE IN LIME AS PER IS 1514:1990 (R.A.2020)
BULK DENSITY CYLINDRICAL METAL MEASURE-0.01 CUM (10 LTR) - IS 1199
As Per IS : 1199-Part 3, ISO 1920-2 : 2016, BS : 1881, ASTM C29, Size 250 mm dia X 280 mm depth X 4 mm thickness
CAPPING SET-VERTICAL-WITH ALL ACCESSORIES-IS 516, ASTM C617-
Complete with Cylinder capper, Cylinder carriers, Capping compound 5 kg, Melting pot and rubber capping pad for 150mm and 100mm dia cylinders.
