FLEXURAL STRENGTH TESTING MACHINE - DIGITAL
Suitable to test as IS:9399-1979 (R.A.2013)/IS 516 (Part 1/Sec 1) : 2021. Used for the determination of Flexural strength strength of concrete, prism of 15 x 15 x 70 cm or 10 x 10 x 50 cm by third point loading method, Complete with motorized pumping unit, Digital Load indicator, To work on 220 Volts AC single Phase.
LE-CHATLIER MOULD (FOR SOUNDNESS TEST)
The soundness test determines the ability of cement or lime to retain its volume after setting. Unsound materials can expand excessively after hardening, leading to cracks or disintegration in structures. This test is critical for ensuring structural durability and reliability. As per IS 4031 (Part 3), ASTM C151, EN 196-3:
GRADIENT RATIO TEST APPARATUS - (ASTM D 5101)-
Complies with following International Standards : ASTM D5101. Purpose : This test method covers a performance test applicable for determining the Soil‑Geotextile system permeability and clogging behavior under unidirectional flow conditions.
HIGH SPEED SOIL STIRRER - IS 2720(IV)
The high-speed soil stirrer is a valuable tool in particle size analysis, ensuring that soil particles are properly dispersed, which leads to more reliable and repeatable test outcomes. Complies with IS : 2720 (PART IV), AASHTHO T88, ASTM D7928, BS : 1377‑2.
CONE PENETROMETER FOR CEMENT MORTAR - IS 2250
As per IS 2250-1965 (Annex A),For determining the consistency of masonry mortar.
TRIAXIAL CELL - 38MM & 50MM DIA SOIL SPECIMEN
A triaxial cell is a crucial component in the triaxial shear test of soil to determine soil shear strength parameters, particularly the cohesion and angle of internal friction. The triaxial cell provides a controlled environment where soil samples can be subjected to stress conditions similar to those encountered in the ground, including both confining pressure and axial stress.
COMPRESSION FRAME JIG ASSEMBLY AS PER - EN 196
This jig is designed for testing of 40 x 40 x 160mm cement prism after breaking in Flexure and also can be adapted with 50mm platen to test 2” or 50mm mortar cement cube specimen. This jig can be fitted to Compression Test Machine.
DEAN AND STARK APPARATUS FOR BITUMEN - IS 1211
Dean & Stark Apparatus for estimation of moisture in Tar & Bitumen. As per IS 1211 ASTM D 2448 IP-291 with 10cc. receiver.
ASTM D6241-HYDRAULIC GRIPPING-CBR PUNCTURE TEST
As per ASTM D6241, ISO 12236, IS 13162 (PART-4), IS 16078 To carry out Static CBR Puncture test of Geotextile Fabric
INITIAL SURFACE ABSORPTION TEST APPARATUS (ISAT)
The Initial Surface Absorption Test (ISAT) apparatus is used to measure the rate of water absorption on the surface of concrete. This test provides an indicator of the permeability of the concrete surface, which directly relates to its durability. High initial absorption can indicate low durability and higher susceptibility to freeze-thaw cycles, chloride ingress, or carbonation. As per BS 1881: Part 208:1996.
LENGTH COMPARATOR
Compliance Standards: IS 4139, IS : 12894, Application: To measure length change in AAC Blocks/ calcium silicate bricks/Cement concrete specimens, using a suitable micrometer. Supplied with Digital Dial Gauge (0.001mm) and a standardization bar
RIFFLE SAMPLE DIVIDER FOR SOIL & AGGREGATES
This equipment is crucial for preparing samples for other soil and aggregate tests like sieve analysis, specific gravity, water absorption, CBR Test, Proctor test etc., ensuring the samples used are representative of the entire batch. As per IS:1607/IS:2720(Part 1)/ASTM C702 / C702M - 18/BS 812-102:1989/EN 932-2:1999
FLEXURAL STRENGTH TESTING MACHINE - HAND OPERATED
Hand operated for field use. Suitable to test Concrete Prisms of 15 X 15 X 70 cm or 10 X 10 X 50cm. With Dial Load Indicator having maximum red pointer. With POLYHYDRON Pump. IS 516 (Part 1/Sec 1) : 2021 / IS:9399. Digital Load Indicator also available on request. Motorized version to maintain pace rate as per the Standard requierements also available. (Refer Model TM-74D/TM-74AD/TM-74FAD)
GILLMORE NEEDLE APPARATUS - (ASTM C266, AASHTO T154)
The Gilmore needle test determines the initial and final setting times of cement paste. The Instrument measures the time required for the cement paste to stiffen under standardized conditions using two needles: Initial set needle (smaller diameter) Final set needle (larger diameter). The test provides critical information about the behavior of cementitious materials during hydration and is crucial for construction scheduling. As per ASTM C266, AASHTO T154, ASTM C141, ASTM C91.
CEMENT MORTAR FLEXURAL TESTING JIG - EN 196, EN 1015
As per EN 196-1, EN 1015-11, IS:4031 (Part 8)
