CEMENT AUTOCLAVE - IS 4031
The Cement Autoclave Test, performed as per IS 4031:1988 (Part 3), ASTM C151, and ASTM C490, is a method to measure the soundness or potential delayed expansion of cement, specifically by assessing its tendency for expansion under high-pressure steam conditions. The Autoclave is suitable for conducting accelerated soundness test on cements by the autoclave expansion test requiring constant steam pressure with the correspondent constant temperature.
LATERAL PRESSURE ASSEMBLY
In a triaxial test setup, a lateral pressure assembly is used to apply a controlled pressure around the specimen to simulate in-situ conditions or the natural confining pressures that the material would experience underground. This assembly is crucial in determining the strength and deformation properties of soil or rock under controlled laboratory conditions.
SOIL HYDROMETER WITH HYDROMETER JAR
The Soil hydrometer is a precision instrument used for determining the specific gravity of soil suspensions, particularly in hydrometer analysis for particle size distribution. It measures specific gravity within a range of 0.995 to 1.038, with graduations at 0.001 intervals, and is calibrated at 20°C. As per IS 2720, Part-IV, 1985. Complete with Soil Hydrometer, Hydrometer Jar and Rubber cork.
ACCELERATED CURING TANK
Accelerated Curing Tank designed to accommodate concrete cube moulds (capacities ranging from 3 to 36 cubes of 15 cm and various sizes), suitable for cement mortar cube moulds. Provides accelerated curing by boiling water method up to 100 ± 2°C and warm water curing at 55 ± 2°C, with provision for normal curing at 27 ± 2°C. Conforms to IS: 9013 and IS: 516 standards.
PLATE BEARING TEST APPARATUS-IS 1888
As per IS:1888-1982 (R.A.2021), Supplied with Hand operated Hydraulic Jack 500 KN, High pressure flexible pipe of 5 meter length, Ball and socket arrangement, Magnetic base -4 Nos, Dial Gauge 0.01 X 25 mm - 4 Nos, Datum Bar, Grooved square M.S.Plates of 60 cm, 45 cm and 30 cm. Load Truss and anchor spikes to be purchased separately
UNIVERSAL OR COMBINATION PERMEAMETER
Consists of one gunmetal mould wooden stand 100 mm dia x 127.3 mm height with extension collar, drainage base, drainage cap, metallic clamping ring, two porous stone for base & top, wooden stand with nine glass tubes of 6 mm, 10 mm, 20 mm, 25 mm, 40 mm, 50 mm, 60 mm, 70 mm & 75mm dia, complete with rubber connecting tube 3 meter long with pinch cock, Air brass tube, rubber stopper, bottom tank of copper with chromium plating with pinch cock.
BISHOP PORE PRESSURE APAPRATUS (10KG/CM²)
The Bishop pore pressure apparatus is used in a triaxial test system to accurately measure and control the pore water pressure within the soil sample during testing. It allows precise monitoring of the pore water pressure within the soil specimen, which is essential for determining the effective stress in the soil. Effective stress is critical in soil mechanics as it influences the soil's shear strength, compressibility, and overall behavior under load.
PERMEABILITY MOULD (FOR SOIL) 100MM DIA
The permeability test of soil, as per IS:11209, is intended to determine the coefficient of permeability, which describes how easily water can flow through soil. This parameter is essential for understanding groundwater movement, soil drainage properties, and designing earth structures like dams, retaining walls, and foundations.
CURING COMPOUND MOULD-ASTM C156-03
To evaluate the effectiveness of liquid membrane-forming curing compounds on concrete surfaces by measuring their ability to retain moisture. Compliance with ASTM C156-03, IS 10080
ELASTIC RECOVERY MOULD WITH BASE PLATE
The Elastic Recovery Mould is a precision-engineered testing apparatus designed to evaluate the elastic recovery properties of bituminous materials. Manufactured from high-quality, durable materials, it ensures accurate and repeatable results in laboratory environments. The mould is supplied with a sturdy base plate for enhanced stability during testing, minimizing deformation and ensuring consistent performance. Compliant with international standards including ASTM D6084, EN 13398, and EN 13589, this mould meets stringent quality and dimensional requirements.
TRIAXIAL CELL - 38MM
As per IS:2720 (Part-XII). Supplied Complete with Accessories Loading pad, Plain discs, Porous Stone, Split sand former, Sheath stretcher, One dozen rubber sheaths, Synthetic Rubber 'O' rings and One Plastic drainage Tube.
TRIAXIAL CELL - 50MM DIA SOIL SPECIMEN
As per IS:2720 (Part-XII). Supplied Complete with Accessories Loading pad, Plain discs, Porous Stone, Split sand former, Sheath stretcher, One dozen rubber sheaths, Synthetic Rubber 'O' rings and One Plastic drainage Tube.
CONCRETE PERMEABILITY TESTER
Compliance Standards : IS 516 (Part 2/Sec1): 2018, BS EN 12390 (PART 8). Applications : Water Penetration testing machine is at 3 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure. An operator can test any - Concrete cylinder of size 150 mm dia. X 160 mm high or cube moulds of 150 x 150 x 150 mm dimensions. Supplied complete with necessary Spanners and Air compressor of required capacity.
PLASTIC LIMIT APPARATUS - IS-2720 (PART-VII)
The plastic limit test of soil is used to determine the moisture content at which soil changes from a plastic to a brittle or friable state. Packed in wooden box. As per IS-2720 (PART-VII), EN ISO 17892 (PART 12), BS 1377 (P-2), ASTM D4318
