NABL Accredited Calibration Laboratory

MUFFLE FURNACE-12" X 6" X 6"-900°C-GMP

Model Number : EIE-107DG07

The Outer chamber of S.S.304, heating chamber consists of rectangular horizontal totally enclosed Muffle bracket, Heating elements are made of Nichrome/Kanthal wire, wounded externally on the muffle. Temperature controlled by Dual display microprocessor based Digital temperature indicator cum controller with K type sensor. Max. Temperature: 900 °C. & working Temp.: 850 °C , Working on 230V. Detailed Specification as follows.

TYPE OF FURNACE

Salient Features:

  1. Horizontal Design
  2. Front loading type
  3. Improved model
  4. Ceramic fiber wool insulation instead of brick insulation
  5. Ceramic fiber wool insulation results in weight and size reduction of furnace
  6. The weight and size of the furnace is 1/4th times and 30% lesser respectively as compared to brick furnace.
  7. The heat up time is less
  8. Heat loss is very low‑resulting in power saving

Vent Port:

Built in vent port for removal of noxious gases etc preferably with a provision of connecting the extension pipe with vent lid should be air tight for Volatile Matter analysis.

Calibration port:

Provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment

Standard Fittings supplied with the instrument:

  1. Compensating cable
  2. Indicating lamps
  3. Indian Standard Power plug & cord

Note:

Silica Crucible with Lid / Quartz Crucible with Lid / Platinum Crucible with Lid / Crucible tong / Protective thermal hand gloves and Electronic Weighing Balance (0.1 mg or 1 mg sensitivity) are available at extra cost. Price on request.