
MUFFLE FURNACE - 12" X 6" X 6"-900°C
Model Number : EIE-107DP07
The Outer chamber of CRC sheet duly powder coated. , heating chamber consists of rectangular horizontal totally enclosed Muffle bracket, Heating elements are made of Nichrome/Kanthal wire, wounded externally on the muffle. Temperature controlled by Dual display microprocessor based Digital temperature indicator cum controller with K type sensor. Max. Temperature: 900 °C. & working Temp.: 850 °C , Working on 230V. Detailed Specification as follows:
TYPE OF FURNACE
- MUFFLE FURNACE (900°C) / COMPLETE S.S.(GMP) / 9 X 4 X 4"
- MUFFLE FURNACE (900°C) / COMPLETE S.S.(GMP) / 10 X 5 X 5"
- MUFFLE FURNACE (900°C) / COMPLETE S.S.(GMP) / 12 X 6 X 6"
- MUFFLE FURNACE (900°C) / OUTER CRC WITH POWDER COATED / 9 X 4 X 4"
- MUFFLE FURNACE (900°C) / OUTER CRC WITH POWDER COATED / 10 X 5 X 5"
- MUFFLE FURNACE (900°C) / OUTER CRC WITH POWDER COATED / 12 X 6 X 6"
- MUFFLE FURNACE (900°C) / OUTER CRC WITH POWDER COATED / 12 X 8 X 8"
- MUFFLE FURNACE (900°C) / OUTER CRC WITH POWDER COATED / 18 X 9 X 9"
- REFRACTORY FURNACE (1200°C) / COMPLETE S.S.(GMP) / 9 X 4 X 4"
- REFRACTORY FURNACE (1200°C) / COMPLETE S.S.(GMP) / 10 X 5 X 5"
- REFRACTORY FURNACE (1200°C) / COMPLETE S.S.(GMP) / 12 X 6 X 6"
- REFRACTORY FURNACE (1200°C) / COMPLETE S.S.(GMP) / 12 X 8 X 8"
- REFRACTORY FURNACE (1200°C) / COMPLETE S.S.(GMP) / 18 X 9 X 9"
- REFRACTORY FURNACE (1200°C) / OUTER CRC WITH POWDER COATED / 9 X 4 X 4"
- REFRACTORY FURNACE (1200°C) / OUTER CRC WITH POWDER COATED / 10 X 5 X 5"
- REFRACTORY FURNACE (1200°C) / OUTER CRC WITH POWDER COATED / 12 X 6 X 6"
- REFRACTORY FURNACE (1200°C) / OUTER CRC WITH POWDER COATED / 12 X 8 X 8"
- REFRACTORY FURNACE (1200°C) / OUTER CRC WITH POWDER COATED / 18 X 9 X 9"
Salient Features:
- Horizontal Design
- Front loading type
- Improved model
- Ceramic fiber wool insulation instead of brick insulation
- Ceramic fiber wool insulation results in weight and size reduction of furnace
- The weight and size of the furnace is 1/4th times and 30% lesser respectively as compared to brick furnace.
- The heat up time is less
- Heat loss is very low‑resulting in power saving
Vent Port:
- Built in vent port for removal of noxious gases etc preferably with a provision of connecting the extension pipe with vent lid should be air tight for Volatile Matter analysis.
Calibration port:
- Provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment
Standard Fittings supplied with the instrument:
- Compensating cable
- Indicating lamps
- Indian Standard Power plug & cord
Note:
Silica Crucible with Lid / Quartz Crucible with Lid / Platinum Crucible with Lid / Crucible tong / Protective thermal hand gloves and Electronic Weighing Balance (0.1 mg or 1 mg sensitivity) are available at extra cost. Price on request.
| Inner working size | 12" x 6" x 6" (300 mm D x 150 mm W x 150 mm H) |
|---|---|
| Chamber volume | 8 liters |
| Construction | Exterior body made of Mild Steel Material, powder coated |
| Working Temperature | 850 °C |
| Maximum Temperature | 900°C |
| Temperature Accuracy | ± 5 °C |
| Temperature Resolution | 1 °C |
| Temperature sensor | K- type sensor |
| Temperature Control | Dual display microprocessor based Digital temperature indicator cum controller |
| Insulation | Ceramic fiber wool insulation |
| Power Consumption | 3.0 KW |
| Heating | KANTHAL wire in coil form wound on the muffle, embedded in high grade refractory cement |
| Circuit Wiring | As per CE Norms |
| Overall Dimensions | 510 X 805 X 740(L X W X D) mm |
| Weight (Approx.) | 84 Kg |
| Power Supply | 220/230 Volts, Single phase, AC Supply |
| Standard Supply | Cord Wire 2.5 meter Long |
| Power Plug | |
| Optional fittings at extra cost | Software |
| Hour meter | |
| Digital Timer | |
| Over Temp Protection System - with Audio Alarm |





