APPARATUS FOR DETERMINATION OF MATTER INSOLUBLE IN TOLUENE - IS 1215
Determining the matter insoluble in toluene is essential for assessing the quality and purity of materials like tar, bitumen, and pitches. Insoluble materials can affect the flow, viscosity, and bonding characteristics of bitumen or tar. The apparatus measures the insoluble content and indicates the presence of impurities. As per IS:1215:2021.
DETERMINATION OF MINERAL MATTER (ASH) - AS PER IS 1217
As per IS:1217,AASHTO T 111. Supplied Complete with 50 ml silica crucible with Lid, Muffle furnace capable to attain temp. up to 900 deg C, Crucible tong and 150mm dia Glass Desiccator with desiccant.
DETERMINATION OF NAPTHALENE IN TAR & BITUMEN - AS PER IS : 1219
AS PER IS - 1219.
APPARATUS FOR DETERMINATION OF PHENOL-IS 1218
The apparatus consist of Phenol Flask, a Beaker of suitable size, Separating funnel with stopper, a Glass Thermometer of 0-100 deg C or similar range but without chemicals or reagents
APPARATUS FOR DISTILLATION OF CUT BACK BITUMEN - IS 1213
The distillation of cutback asphalt, according to IS 1213 and ASTM D402, is a test to determine the proportions of volatile components in cutback asphalt by distilling off the volatile fractions at specified temperatures. This process helps to understand the composition and stability of the cutback asphalt in terms of the amount of volatiles present. Complete with one distillation flask of 500ml. capacity and one 100 ml. crow receiver Electrically heated model with Energy regulator.
ENVIRONMENTAL CHAMBER FOR CREEP TENSILE TESTING - ASTM D6992
As per ASTM D6992,Environmental Chamber is designed to provide precise temperature control for creep tensile testing. It ensures accurate and reliable testing conditions for assessing material behavior under varied environmental influences. The chamber's robust construction and user-friendly features support consistent performance and easy integration with your testing equipment.
SAYBOLT VISCOMETER-WITH TWO TUBES
The Saybolt Viscometer is used to determine empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures. The time it takes for a 60 ml sample to flow through a tube with a specified diameter (furol (3.150 mm) or universal (1.765 mm) ) is measured and reported in seconds. The viscometer can be used for temperatures between 25 and 50 °C.The viscometer includes waterbath, motorized stirrer, electric heater with digital temp.controller with control accuracy of ± 0.1°C. (The room temp. must be @ 20-21°C to achieve control accuracy) Refrigerated Model also available
WATER CONTENT OF BITUMEN EMULSION - IS 1211
A reliable apparatus designed for precise moisture determination in tar and bitumen as per IS 1211 and IP 291 standards. Complete with a 500 ml heat-resistant flask, condenser, and a choice of 2 ml or 10 ml receiver.
APPARATUS FOR DETERMINATION OF RESIDUE ON SIEVE
To determine the residue on the sieve as per IS:8887, the test involves assessing the fineness of materials by sieving them through a designated mesh sieve and quantifying the remaining material (residue). This test is essential in quality control processes to ensure that materials meet specified fineness and consistency requirements.
COLD BENDING TESTER FOR BITUMEN SHEETS
Used to determine flexibility and cracking resistance of bitumen sheets at low temperatures. Used to determine minimum bending temperature in cold environment.
DRYING SHRINKAGE APPARATUS FOR CONCRETE - AS PER IS 516(PART-6)
Consist of a measuring apparatus incorporating a suitable dial gauge reading accurately to 0.001mm. This gauge will be rigidly mounted in a measuring Frame and will have a recessed end which can be located upon a 6.5 mm diameter ball or other reference point cemented in the specimen. The other end of the frame will have a similar recessed seating which can be located upon a second ball or reference point in the specimen. An invar steel rod of a suitable length with 6.5 mm diameter steel ball or hemispherical ends can be used as a standard of length against which the readings of the gauge can be tested. The apparatus will be designed to test Mould of 75mm x 75mm x 300mm long concrete specimen. Mould for casting concrete specimen of 75 x 75 x 300 and drying Oven available at extra cost.
BRAZILIAN TEST APPARATUS AS PER IS : 10082 (1981)
As per IS : 10082 (1981). A loading frame, 100kN Capacity, having a base and a cross head joined together with two solid pillars with nuts. On the base, a 100kN hydraulic jack is fixed between the pillars & a heavy duty pumping unit and oil reservoir on the side. A 100kN capacity pressure gauge is fixed to the jack for indicating the load on the specimen. An operating handle for the jack is also provided. One Brazilian Attachment for 'NX' size core size specimen with thickness half the diameter is supplied as a standard. Digital version also available
CERCHAR ABRASIVITY INDEX TEST ON ROCK SAMPLE - ASTM D7625-10
Abrasively Index Test on Rock Sample - ASTM D7625-10 (Cerchar Abrasivity Index ) Supplied without Microscope. Supplied with 10 Nos. stylus
POROSITY AND DENSITY DETERMINATION OF ROCK - IS:13030
Porosity and Density Determination of Rock Using Saturation and Caliper Techniques. The saturation and caliper techniques are commonly used to determine the porosity and density of rocks. These methods provide detailed insights into the rock's physical properties, which are crucial for various applications, including geology, civil engineering, and petroleum engineering. As per IS:13030-1991(R.A.2021)
DIGITAL POINT LOAD INDEX TESTER
As per ASTM D5731, IS:8764. Capacity 100 KN X 0.01 KN, with Calibration.
TRIAXIAL TESTING MACHINE FOR ROCK
The Rock Triaxial Testing Machine is designed for comprehensive testing of rock specimens under static and dynamic loading conditions. Conforming to international standards, it allows for Triaxial, Unconfined, and Indirect Tensile tests, making it an ideal choice for geotechnical, mining, and rock mechanics applications.
CEMENT / FLY ASH SAMPLER - FOR BULK SAMPLING
The slotted tube-sampler will be between 1.5 to 1.8 meter long and about 35 mm in outside diameter and will consist of two polished brass telescopic tubes with registering slots which are opened or closed by rotation of the inner tube; the outer tube being provided with a sharp point to facilitate penetration. Extremely useful for sampling from Bulk Cement and fly ash ponds.
DENSITY BASKET AS PER ASTM D6390 - DRAIN DOWN TEST
Standard basket meeting the dimensions shown in Fig. 1 as per ASTM D6390 / as per IRC SP 79 2008. Dimension is mentioned in above mention code "annex-C" Page no. 16. The basket is constructed using standard 6.3 mm sieve cloth. Standard basket meeting the dimensions shown in Fig. 1. The basket is constructed using standard 6.3 mm sieve cloth as specified in Specification E 11. 108 ± 10.8 mm dia X 165 ± 16.5mm height. Basket bottom will be of 25mm ± 2.5mm height.
BENDING STRENGTH TESTING MACHINE FOR CONCRETE KERBS - IS 5758:2020
As per IS : 5758 (2020) with TOUCH SCREEN control panel and automatic pace rate control to control the rate of loading. Capacity 50000 Kgf. Least count 0.1 Kgf. with adjustable test span to accommodate different size tile specimen Direct reading of BENDING STRENGTH in KN or Kgf. Working on 230 V AC single Phase 60 Hz. PC connectivity with software available at extra cost.
BENDING STRENGTH TEST APPARATUS - JIS A5372
The Bending Strength Test (JIS A5372) evaluates the flexural strength of construction materials, such as ceramics, tiles, and concrete, to determine their durability and performance under bending forces. Electro-hydraulic Design, quite and vibration free operation. Automated or computer-controlled load application for consistency and precision in load rate. PC connectivity with software available at extra cost.
HYDRAULIC (KBR PRESS) - 15 TON - MANUAL
A Complete Laboratory hydraulic press producing a force of about 15 tones to make high quality FTIR Kbr pellet press, XRF pellet press & Thin Film Press applications. Typically used by R&D & QC labs for various pelleting applications for IR/FTIR/XRF Solid Sampling.
HYDRAULIC (KBR PRESS) - 25 TON - MANUAL
Complete Laboratory hydraulic press producing a force about 25 tones use to make high quality. Without Die set. Die set available at extra as per the application. Motorized version also available.
HYDRAULIC (KBR PRESS) - 40 TON - MANUAL
Complete Laboratory hydraulic press producing a force about 40 tones use to make high quality Pallets
BENDING STRENGTH TEST APARATUS - FOR BOX CULVERT
The bending strength of concrete culvert. Electro-hydraulic Design, quite and vibration free operation. PC connectivity with software available at extra cost.
