ROCK SHEAR BOX APPARATUS
The direct shear test assesses the shear strength parameters of rock under various normal stresses. It provides data on the cohesion and internal friction angle of the rock, essential for understanding rock behavior under different loading conditions.
ROCK SHEAR BOX APPARATUS - DIGITAL
The rock shear apparatus test, as per ASTM D5607 and ISRM (International Society for Rock Mechanics), evaluates the direct shear strength of rock specimens, including intact rock and rock discontinuities. Electronic Model with Data logging facility.
STORAGE STICKING TESTER - AS PER IS 13826 PART 3
Apparatus for the determination of storage sticking property of the Bitumen based felt. Storage sticking is the property of bitumen based felt due to which layers of felts kept together have tendency to stick. A chamber, suitably fitted with a thermostate, capable of maintaining a constant temperature of 55 ± 2°C or higher temperature as per the requirement of the particular type of the felt for 18 hours.
FRAASS BREAKING ASSEMBLY WITH ACCESSORIES AS PER IS 9381
As per IS:9381 and EN 12593. Supplied complete with standard accessories as detailed under. Please consider purchase of spares and optional accessories as per your best judgement. Please consult us in case of any clarifications. Advanced Automatic Fraass breaking point tester also available.
REACTION CONTAINER - IS 2386 (PART VII)
The reaction container specified in IS 2386 Part VII and ASTM C289 is used for assessing the potential alkali reactivity of aggregates by measuring their reaction with a sodium hydroxide solution. Made of stainless steel, 50 to 75 ml. capacity, fitted with air tight cover.
COMPACT LOADING UNIT 100 KN FOR MARSHAL 6" DIGITAL
Compact Loading Unit with 100 kN capacity for 6" Marshall testing, featuring digital load and flow measurement for accurate and efficient performance.
UNIVERSAL DIGITAL MULTISPEED LOAD FRAME WITH SOFTWARE
The Universal load frame is a system designed for carrying out 3 different tests, mainly CBR Test, Unconfined Compression test and Marshal Stability test. The Load Frame is equipped with a Digital Speed indicator on which any pre-defined speed can be digitally set. There no gear and lever to mechanically adjust the loading speed. The Load and displacement are measured on a Digital Indicator. Complete with software.
MARSH CONE FUNNEL - WITH STAND AND MEASURING CYLINDER - FOR GROUT TEST - IS 14343
This cone is used to find out viscosity of slurry and like material. The marsh cone is 6 inch(150 mm) in diameter at the top and 12 inch(300 mm) long, and tapers to join a tube 2 inch long and 5 mm inside dia. The capacity of the funnel is 2000 cc. the top of the cone has a screen with 1.5 mm opening for screening out lumps.Time in seconds required to flow out 1000 cc of slurry from cone is measured as funnel viscosity of the material. Supplied without stop watch
CONCRETE PERMEABILITY TESTER - 6 CELL - COMPACT
Compliance Standards : IS 516 (Part 2/Sec1): 2018, BS EN 12390 (PART 8). Applications : Water Penetration testing machine is at 6 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure. An operator can test any - Concrete cylinder of size 150 mm dia. X 160 mm high or cube moulds of 150 x 150 x 150 mm dimensions. Supplied complete with necessary Spanners and Air compressor of required capacity. Moulds are available at extra cost
AUTOMATIC COMPRESSION TESTING MACHINE - 500 KN
This machine is essential for precise and efficient cement testing, ensuring compliance with industry standards critical to civil construction. It is widely used in construction projects and laboratories to validate the quality and compressive strength of Cement-concrete materials. Conforms to IS: 4031 (Part 6), EN 196-1, ASTM C109, ISO 679, BS 4550-3.4,JIS R 5201 and other international standards. Automatic Operation: Minimal user input required; automatic rapid piston approach, test speed adjustment, and motor stop after specimen failure.Adjustable pace rate (1 kN/sec to 10 kN/sec) with dual-stage pump for fast and precise execution. Robust Frame: High-stiffness welded frame with a heavy-duty spherical seat for accurate specimen alignment.PC software for two-way communication, result storage, and report printing.
CALIBRATION ANVIL FOR CONCRETE TEST HAMMER
The Calibration Anvil for Concrete Test Hammer is used to verify the accuracy of rebound hammers, as per IS: 516 (Part 5/Section 4): 2020 and ASTM C 805. Made of hardened steel, it provides a standard reference to ensure accurate and consistent rebound measurements for concrete strength testing. Steel anvil for verification of the hammer, defined with a hardness between 64 - 68 HRC and a mass of (20 ± 1) kg and a diameter of approximately 150 mm. Weight 20 kgs approx.
AUTOMATIC MAN HOLE COVER TESTING MACHINE - 500KN
The manhole cover testing machine is designed as per IS 12592. The machine will be able to accommodate manhole cover of 1200 mm x 1200 mm size. With variable AUTOMATIC pace rate CONTROL from 1 kN / sec to 10 kN / sec. The machine display digital read out, showing actual load, peak load and permanent set .The machine is able to conduct 5 cyclic load test automatically for permanent set. The machine is able to hold the load for 30 sec to conduct the load test and there after will be release automatically.
APPARATUS FOR THE MEASUREMENT OF BEAM CMOD AND TOUGHNESS OF FRC - FULLY AUTOMATIC - SERVO CONTROLLED - EN 14651
The "Apparatus for the Measurement of Beam CMOD and Toughness of FRC - Fully Automatic - Servo Controlled" is designed to evaluate the fracture properties of Fiber Reinforced Concrete (FRC) in compliance with ASTM C1550-08, EN 14488-5, EN 14651, and ASTM C1609 standards. This advanced, fully automatic system is servo-controlled to ensure precise, consistent loading and accurate measurement of crack mouth opening displacement (CMOD) and toughness. It provides reliable data on the material's performance and durability, making it ideal for testing FRC under controlled conditions to assess its structural integrity.
FULLY AUTOMATIC COMPRESSION/FLEXURAL TESTING MACHINE - 100 KN/15 KN
The EIE Automatic Cement Compression and Flexure Testing Machines are designed to simplify testing processes, ensuring accurate and efficient results. Their robust design, intuitive operation, and advanced safety features make them ideal for laboratories focused on high-quality testing of construction materials. Supplied complete with flexural and compression test jigs
JODHPUR MINI COMPACTOR
Used for determining the relationship between the moisture content and density of compacted soil.
FLOW CONE APPARATUS-EN 445-FOR MORTAR, MUD AND GROUT
The flow cone apparatus is used to determine the fluidity and workability of grout, particularly for prestressing ducts in post-tensioned structures. The test measures the time required for a specified volume of grout to flow through an orifice of a standardized cone. The measured flow time helps assess the consistency and suitability of the grout for application. Made of Stainless Steel 304. Supplied with 4 interchangeable (8, 9, 10 and 11 mm diameter) nozzles with fitting bush. Interchangeable nozzle 12.7 mm and 15mm available at Extra Cost.
J14 FUNNEL WITH STAND - WITH MEASURING CYLINDER
The J14 Funnel is used for measuring the flowability of grouts, mortars, and other fluid materials. It is similar to flow cone tests but typically designed for more fluid materials, especially in tunneling, grouting, and construction applications. As per EN 445, EN 934-6 , NF P18-507, JIS A 6204.
GROUT VOLUME CHANGE (MICROMETER BRIDGE SET)
The Grout Volume Change (Micrometer Bridge Set) conforms to ASTM C1090 standards for measuring grout volume changes. It includes a micrometer bridge, depth gauge, cylinder mould, and accessories, and is used to measure height changes due to hydration, settlement, evaporation, and other physical/chemical effects during hardening.
APPARENT BULK DENSITY OF UNPACKED MORTAR POWDER - CSTB 2435-
Bulk Density of Cement Apparatus is used for the measurement of the apparent density (bulk density) of powders and non-cohesive materials.
SAYBOLT VISCOMETER-WITH FOUR SAYBOLT TUBES
A Saybolt Viscometer with Four Saybolt Tubes, as per ASTM D88 and IS:3117-2019, measures the viscosity of petroleum products. It features four tubes for simultaneous testing, with results expressed in Saybolt Universal Seconds (SUS). This instrument ensures accurate viscosity measurement for quality control in the petroleum and lubricant industries.Electrically heated model complete with Four Saybolt Tubes and electrical control panel with all accessories. With 4 Nos. Saybolt Viscosity Flask but without optional accessories.
FLEXURAL STRENGTH TESTING MACHINE - FOR TIMBER - EN 408
EN 408:2010+A1:2012 specifies the test methods for determining the flexural properties of structural timber and glued laminated timber (glulam). The Flexural Testing Machine used for these tests comply with the requirements to perform four-point bending and three-point bending tests accurately.
HIGH SPEED MECHANICAL SOIL STIRRER - 16000 TO 18000 RPM
Complies with following International Standards. IS : 2720 (PART IV), AASHTHO T88, ASTM D422, BS : 1377‑2.
ULTRASONIC DRILLING MONITOR - RSM-HGT(D)
Large Screen Intelligent Processing, Dual-purpose Wet and Dry Hole Testing.
RSM-FBN(A) - BRIDGE DEFLECTION TESTER - NON-CONTACT BRIDGE STATIC AND DYNAMIC
Product profile: Through the most advanced image quality assessment algorithm, image quality enhancement algorithm and fast camera self-calibration technology, the RSM FBN(A)non-contact bridge static and dynamic deflection tester can quickly measure the high-precision dynamic and static deflection, displacement and vibration at multiple points of such facilities as bridges, towers and hoisting machinery in real time through a main machine without any marks on site. The software system matched with the instrument has the functions of guided operation, automatic data recording, automatic calibration, intelligent point selection, real-time output, ultra-limit alarm and safety assessment. The instrument is designed integrally and equipped with military grade sensors and connectors, so it can be used intuitively, simply and conveniently on site
PIN HOLE TEST APPARATUS - FOR SOIL - ASTM D4647
As per BS 1377:5; ASTM D4647. Pinhole Test Apparatus is used for evaluating the erodibility of clay soils by flowing water through a small hole that is drilled through the compacted specimen. The apparatus consist of a cylindrical plexiglass body (container) fitted top cap with a water inlet and the base cap with an outlet connection, a plastic nipple, a plastic centering guide, a wire punch (1.0 mm), a stand to support the apparatus with 1100 mm scale and standpipe tube(Ø4mm IDx6mm OD), four pcs wire mesh, 1,5m pvc tubing with a valve, 10ml, 25ml and 50 ml graduated glass measuring cylinders and an anvil with a tamper. Constant level water tank and de-airing water equipment should be ordered separately.
CONCRETE MATURITY METER - 16 CHANNEL
This is a temperature monitoring unit with temperature data logging system at user defined interval, Mostly required for mass concrete. It measures the temperature of concrete from the time of concrete casting, its precise temperature sensors are inserted inside the fresh concrete at the time of casting, and it continues to log the Temperature data till the heat of hydration completes. This practice provides procedure for estimating concrete strength by means of Maturity method. The maturity index is expressed either in terms of the Temperature and Strength Temp. sensors available at extra cost and quoted separately. One sensor required for each channel.
