HYDROSTATIC PRESSURE RESISTANCE OF WATER PROOFING MEMBRANE APPARATUS
As per ASTM D5385, IS 16352. This apparatus is designed to determine the hydrostatic pressure resistance of waterproofing membranes by subjecting the test specimen to controlled water pressure. It evaluates the membrane’s ability to withstand water penetration under specified pressure conditions, ensuring suitability for construction and waterproofing applications. Supplied complete with all required accessories, it offers robust construction, accurate pressure measurement, and reliable performance for laboratory testing.
SLURRY SAMPLER - 50 MTR.WITH ROPE-BAILER
SAMPLE BAILER has a second ball check located at the top that permits the bailer to secure a sample from a specific depth without influence from the slurry above. Meets contract specifications for collecting slurry samples for testing physical drilling slurry properties.
HEAT OF HYDRATION APPARATUS - WITH DAQ AND PC CONNECTIVITY - IS 4031, IS 11262
Used to determine the heat of hydration of low heat Portland and hydraulic cement. The instrument is used for determining heat of hydration of cement by measuring difference between heat of solution of dry cement and heat of solution of a separate sample partially heated for 7 days & 28 days.
LABORATORY MODEL PLATE LOAD TEST APPARATUS
For educational use in Engineering Colleges. The students will easily and precisely understand the test conducted at site with convinience of Laboratory conditions.
ASTM D5397 - NOTCHED CONSTANT TENSILE LOAD TESTER - STRESS CRACK RESISTANCE OF HDPE GEOMEMBRANES
Notched Constant Tensile Load Testing Machine for Plastic is used to evaluate the stress crack resistance of polyolefin geomembranes by notched constant tensile load test. It is mainly applicable to the geomembranes used on the landfill site. Dumbbell shaped notched test specimens from a polyolefin sheet are subjected to a constant tensile load in the presence of a surface-active agent and at an elevated temperature. The time to failure of test specimens is recorded and the results of a series of such tests conducted at different stress levels are presented by plotting stress level against failure time for each stress level on a log-log axis.
HOEK CELL FOR ROCK TRIAXIAL - NX - 54.7MM
Hoek cells have been designed to be used for triaxial testing of rock specimens. Hoek cells comprise a steel body complete with two quick release self-sealing couplings, two steel end caps which are screwed to the cell body, 2 pieces of upper and 2 pieces of lower loading caps with spherical coupling and a rubber sealing sleeve to separate the specimen from the cell fluid.
BRE SCREED TESTER-WITH DIAL GAUGE
The BRE Screed Tester is designed to measure the soundness of a sand and cement floor screed. The device consists of a 1 m long, cylindrical guide rod, along which an annular weight of 4kg (or 2kg) travels when released. At the bottom of the guide rod the weight strikes the collar of a case-hardened steel anvil which transmits the impact to the surface of the screed. Four successive impact blows on the same spot are sufficient to test the soundness of the screed. The depth of indentation is measured with an electric or mechanical depth gauge. At the end of taking readings, a number of statistical values are then calculated and printed from the data. Guidance is given on the use of the screed tester for testing floating screeds using a 2 kg annular weight in place of the 4 kg weight normally used.
BULK DENSITY OF CEMENT APPARATUS
Bulk Density of Cement Apparatus is used for the measurement of the apparent density (bulk density) of powders and non-cohesive materials.
FLAKINESS GAUGE - COMPLETE S.S. (BS - 812)
Used to determine the percentage of particles in a coarse aggregate material that have a thickness (smallest dimension) of less than one-half of the nominal size. Particle is flaky when its thickness (smallest dimension) is less than 0.6 of the mid-size of the sieve fraction.
MORTAR MIXER WITH DIGITAL RPM INDICATOR - 4.75 LTR
The instrument is specially designed to prepare cement mortar for Strength Determination. It is used for mixing cement pastes, mortars and pozzolanas. It can also be used for uniform mixing of soils with additives such as lime, cement, etc. The machine is advance version that requited no changing of the gear. It will also show the current rpm.
CYCLIC PLATE LOAD TEST - ASTM D8462 -EIE-C4021
The Cyclic Plate Load Test (CPLT) is a field performance test designed to assess the structural performance and improvement due to geosynthetic reinforcement in pavement layers. It is conducted in accordance with ASTM D8462 and is now a requirement in IRC SP 59 (2024 Amendment) for validating MIF/LCR.
SLUMP CONE FILLING FUNNEL-BS 1881, ASTM C143 -
Compliance Standards BS 1881, ASTM C143
COMPACT CBR LOAD FRAME-ELECTRICAL-SINGLE SPEED-
Single speed of 1.25 mm/min. Works on 230 Volts AC single-phase power. The load frame consists of a BONVARIO ITALY-made geared motor and bronze gears for long-lasting performance. Supplied without CBR mould, surcharge weight, brass perforated plate, tripod stand, spacer disc, penetration piston, proving ring, dial gauge, Proctor mould, and rammer, which are available at an extra cost. Further details are mentioned in the long description.
MARSH CONE FUNNEL - WITH STAND AS PER IS 14343
etailed Specification as follows: This cone is used to find out viscosity of slurry and like material. The marsh cone is 6 inch(150 mm) in diameter at the top and 12 inch(300 mm) long, and tapers to join a tube 2 inch long and 5 mm inside dia. The capacity of the funnel is 2000 cc. the top of the cone has a screen with 1.5 mm opening for screening out lumps.Time in seconds required to flow out 1000 cc of slurry from cone is measured as funnel viscosity of the material. Supplied without stop watch
BS 1377:4 - PERFORATED BASE PLATE - FOR CBR MOULD
Perforated base plate with 10 mm thickness
COMPACT CBR LOAD FRAME-TWO SPEED-DIGITAL-(BS 1377)-
Load frame, Motorized 5000 Kg (50 KN) capacity, With two rate of travel (1.0 & 1.27mm/min)
COMPRESSION TESTING MACHINE UN CONFINED CBR DIGITAL-
Single speed of 1.25/min. Working on 230 Volts AC single Phase
COMPACT CBR LOAD FRAME - SINGLE SPEED - DIGITAL - WITH SOFT WARE
Single speed of 1.25/min. Working on 230 Volts AC single Phase. The Load frame consist of BONVARIO ITALY make Geared Motor and Bronze Gears for long lasting performance. Further details as mentioned in the long description.
IS 2720, 9669 - ELECTRIC OPERATED LABORATORY CBR APPARATUS - WITH 25 KN PROVING RING
The machine feature a rigid two column frame with upper crossbeam, which can be adjusted in height and locked in position with locknuts. The drive force is provided by a mechanical jack housed in the base cabinet which also accommodates the motor and the electric panel. Complete with standard accessories as mentioned below. As per IS:2720 (Part XVI).
UNCONFINED COMPRESSION TESTER CUM CBR TESTER - DIGITAL WITH SOFT WARE
Load Frames are useful device employed for application of compression and penetration loads required for various tests such as unconfined compression test, Triaxial Shear test, California Bearing ratio test
VIBRATING TABLE 3 FT X 1 FT WITH 3 SHELVES FOR VIBRATION TEST DURING TRANSPORTATION
This equipment is used for determination of vibration effect on digital controllers during transportation.
LABORATORY CBR APPARATUS-ELECTRICALLY OPERATED WITH 50 KN PROVING RING-ASTM D1883, AASHTO T193
This test method is used to evaluate the potential strength of sub‑grade, sub‑base, and base course material, including recycled materials for use in road and airfield pavements. The CBR value obtained in this test forms an integral part of several flexible pavement design methods.
ASPHALT MIXER-THEORETICAL DENSITY METER-WITH VACUUM PUMP-WITH VIBRATING TABLE-WITH METAL CONTAINER
This equipment is used for determination of theoretical density of asphalt mixer by vacuum method for application such as asphalt mixer design, road condition investigation, calculation of porosity and compactness in road construction quality management.
APPARATUS FOR DISTILLATION OF EMULSIFIED ASPHALT - (WITH ELECTRIC BURNER) - (ASTM D244, ASTM D6997) - WITH ACCESSORIES
Use of this set will allow the user to accurately determine the representative portion of residue in emulsified asphalts. Used to examine the asphalt emulsions composed principally of a semi-solid or liquid asphaltic base, water and an emulsified agent.
ABSOLUTE AND KINEMATIC VISCOSITY BATH-SEMI AUTOMATIC
As per IS: 1206 (Part II and III).Supplied complete with Viscosity bath with built in PLC,HMI and digital vacuum controller with Vacuum Pump -capable to maintain vacuum of 300 mm/Hg, Indian Make Vacuum Manning Viscometer No.12 and 13, Reverse flow Viscometer No.6 with certificate of constant and calibration certificate for Viscosity bath, Complete with instruction manual. Detailed Specification as mentioned in technical part mentioned below. Canon USA Make Glass U Tube Viscometer, Mercury Manometer, Silicon oil, silicon tubes etc. are available at extra cost
BENDING BEAM RHEOMETER
This instrument is made and designed as per ASTM D6648, BS EN 14771, AASHTO T313. Complete with PC and software but without air compressor and Bath fluid (available at extra cost)
AIR JET SIEVING MACHINE - EIE-AIR-200
Supplied without air jet sieves, Vacuum system and Electronic weighing balance
AUTOMATIC FRAASS BREAKING POINT TESTER
This instrument is used to determine the temperature which a bitumen tends to break rather to flow when cooled and stressed . It can do three tests at the same time in the same environment and calculate the average value.The cooling rate is controlled by computer. It is controlled by micro computer. The cooling rate is controlled automatically. It has automatically timing to bend samples.The test data is shown on the colored LCD and output on built-in printer. Supplied complete with Automatic Breaking Point Tester, Low temp.cyclic Thermostatic bath, Stainless steel sample piece(6 Nos.) and necessary rubber tubings. Other necessary Instruments Viz. Hot Plate, Furnace, Weighing Balance and solvents etc.
AGGREGATE IMPACT TESTING MACHINE WITH BLOW COUNTER (BS - 812)-
Complies with following International Standards : NF P18-574, BS 812. Purpose - For determining the aggregate impact value of coarse aggregate. This test method provides a relative measure of the resistance of an aggregate to sudden shock or impact.
