DUCTILITY TESTING MACHINE
Bitumen Ductility Testing Machine as per (IS:1208) Used to determine the ductility of bitumen by measuring its elongation before breaking under controlled conditions. Helps evaluate adhesion and flexibility for pavement applications.Semi-automatic, non-digital model with thermostatic temperature control. Supplied with 3 Nos. ductility moulds. Available in refrigerated and non rerigerated models. Elastic recovery moulds available separately
LENGTH GAUGE
Used to determine the Elongation Index of the Aggregate. Aggregate particles are considered elongated when their length is more than 1.8 of the nominal size.It consists of a hard wooden base with vertically mounted metal studs as specified in the IS.
BENKLEMAN BEAM APPARATUS
The Benkelman Beam test is widely used to evaluate the deflection of flexible pavements under a standard wheel load, which helps assess the structural condition and design appropriate overlays. As per IRC: 81-1997, ASTM D4694, AASHTO T 256
VEE BEE CONSISTOMETER-IS 10510
As per IS:10510-1983 and IS:1199-1959, Consists of a vibrating table (380 mm × 260 mm) resting on elastic supports at about 305 mm height, complete with start/stop switch, cord, and plug. A holder with detachable swivel arm is provided, fitted with funnel, guide sleeve, and graduated rod with plastic disc to record slump in mm.Supplied complete with sheet metal container with lifting handles, slump cone (open at both ends), and tamping rod (16 mm dia × 600 mm long, rounded at one end).
STANDARD PENETROMETER FOR BITUMEN
Our standard bitumen penetrometer is a precision instrument designed for accurate and consistent penetration testing of bituminous materials. This essential tool for quality control in road construction and asphalt production helps determine the consistency and hardness of bitumen samples.
DIGITAL UNCONFINED COMPRESSION TESTER
The Unconfined Compression (UC) Test is a special case of the triaxial test where no confining pressure is applied to the soil sample. It is applicable only for cohesive soils and determines the compressive strength of the soil in an undrained condition. Complete with 3 speed Digital Load Frame, Built in Digital Load and displacement Indicator. As per IS:2720(Part 10)/IS: 4332 (Part V). Can also be supplied as per ASTM D2166/D2166M/ BS 1377-7/AASHTO T208.
RAPID MOISTURE METER-WITH PRESSURE GAUGE
The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0 - 25% X 1% or 0 - 50% X 1% on the wet weight basis, a counter poised balance for weighing sample or a pocket type electronic weighing balance, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of 4 steel balls (3 OF 12.5MM AND 1 OF 25MM DIA) for thorough mixing. Complete in highly polished wooden carrying case with handle.
VIBRATING MACHINE FOR CEMENT MORTAR - IS : 10080
The machine is capable for compaction of cement mortar cubes as per IS: 4031 and designed as per Standard IS : 10080. The complete frame assembly consists of device to hold a 7.06 cm cube mould to feed the sample in the mould. The frequency of vibration is 12000 ± 400 R.P.M. Vibration per minute. Supplied complete with one 7.06 cm cube mould and a DIGITAL Timer. Complete with One No. poking rod to meet IS: 10080 requirements.
PROCTOR COMPACTION MOULD 100MM DIA - IS 10074
Standard compaction mould, As per IS 2720 (Part VII) 1980 and IS 10074-1982. With base plate and collar. Proctor Rammer available at extra cost. Also available as per ASTM D1557 / BS 1377-4
MODIFIED PROCTOR COMPACTION MOULD 150MM DIA - IS 10074
As per IS 2720 (Part VIII) and IS:10074-1982. Complete with base plate and collar. Proctor Rammer avaiable at extra cost. Also available as per ASTM D1557 / BS 1377-4
RING AND BALL APPARATUS
The Ring and Ball Apparatus is a precision testing instrument specifically designed for determining the softening point of bituminous materials, such as asphalt and pitch. This apparatus operates on the principle of heating a substance along with two horizontal rings until the material softens and flows down at a specific temperature, indicating its softening point.
CONSOLIDATION APPARATUS
AS PER IS :2720(PART-XV) Consists of Loading Unit, maximum capacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. Choice of 1 or 3 or 6 Nos.Consolidation cell assembly, fixed ring type for testing 60 mm dia x 20 mm thick specimens.
COMPRESSION PROVING RING-25 KN
As per IS 4169:2014 (ISO 376:2011, Reaffirmed 2020). Proving rings are typically made from high-grade steel alloys, chosen for their elastic properties and durability. The special manufacturing process ensures the consistent and precise force measurements. Available in the capacity ranging from 0.5 KN to 3000 KN.
CBR MOULD- IS:9669
As per IS:9669. 150 mm Internal dia X 175 mm high with extension collar and perforated base plate. Made of Mild-Steel. Also available as per ASTM D1883 / BS-1377-4
FIELD CBR TEST APPARATUS.
The Field California Bearing Ratio (CBR) Test as per IS: 2720 (Part 31) IRC:37- is conducted to determine the strength of subgrade soil, subbase, and base course materials in road and pavement design. Can also be supplied as per BS 1377-9
GYRATORY SIEVE SHAKER
A Gyratory Sieve Shaker is an advanced device designed for the precise grading of powders, granules, and other materials. It is widely utilized in industries such as chemical processing, pharmaceuticals, food and beverage, and construction materials testing.
SWELL PRESSURE TEST APPARATUS - IS: 2720(Part 41)1977 / IS: 11550 (1985)
The swell pressure test apparatus for soil, as per IS: 2720 (Part 41) 1977 and IS: 11550 (1985), is designed to measure the swelling pressure exerted by expansive soils when they come into contact with water and swell under a confined state.
LARGE DIRECT SHEAR APPARATUS-30 KN
As per IS:2720 (Part 39)/ IS 11593. Supplied with Load Frame, shear box assembly, set of weight, High sensitivity Proving Ring for shear load measurement, capacity : 30 kN (3000 kgf), Consolidation Dial Gauge 0.01 mm x 25 mm, Strain Dial Gauge 0.01 mm x 25 mm with magnetic spacer, etc. Suitable for operation on 415 volts, 50 Hz, 3 phase, A.C. Supply.
COMPRESSION TESTING MACHINE - AUTOMATIC PACE RATE CONTROLLED
Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Automatic pace rate control, auto stop and manual release on failure of test specimen. Inbuilt pen drive slot. (saves reading in excel format) (Record date-time, Sr no and Peak load and N/mm2)
LABORATORY CBR APPARATUS - IS: 2720 (Part XVI), IS: 9669
The machine feature a rigid two column frame with upper crossbeam, which can be adjusted in height and locked in position with locknuts. The drive force is provided by a mechanical jack housed in the base cabinet which also accommodates the motor and the electric panel. Complete with standard accessories as mentioned below. As per IS:2720 (Part XVI). Can also be supplied as per ASTM D1883, BS 1377-4, AASHTO T 193
HEAT OF HYDRATION APPARATUS WITH DIGITAL THERMOMETER - IS 4031, IS 11262
Used to determine the heat of hydration of low heat Portland and hydraulic cement. The instrument is used for determining heat of hydration of cement by measuring difference between heat of solution of dry cement and heat of solution of a separate sample partially heated for 7 days & 28 days. As per IS 4031, IS 11262. Advance version with Datalogger, PC Connectivity with software and temp.resolution of 0.001°C is also available
COMPRESSION TESTING MACHINE - FULLY AUTOMATIC - SERVO CONTROLLED
This machine is essential for precise and efficient concrete strength testing, ensuring compliance with industry standards critical to civil construction. It is widely used in construction projects and laboratories to validate the quality and durability of concrete materials. Conforms to EN 12390-4, ASTM C39, AASHTO T22, IS: 14858 (2000), and other international standards like ISO 7500-1 and JIS A 1108. Automatic Operation: Minimal user input required; automatic rapid piston approach, test speed adjustment, and motor stop after specimen failure.Adjustable pace rate (0.1 kN/sec to 10 kN/sec) with dual-stage pump for fast and precise execution. Robust Frame: High-stiffness welded frame with a heavy-duty spherical seat for accurate specimen alignment.PC software for two-way communication, result storage, and report printing.
WATERBATH FOR SOUNDNESS TEST OF CEMENT
IS 269, 712, 5514, 1727, 2645, 6932 (Part IX), BS 6463, and EN 196-3 standards. The double-walled, argon-welded inner chamber is made of S.S. 304 with high-grade glass wool insulation for excellent thermal efficiency. The bath is designed to raise the temperature from 27 °C ± 2 °C to boiling point in 27 ± 3 minutes. Available in thermostatic (non-digital) and digital temperature indicator-cum-controller models. Supplied complete with a stand to accommodate up to 12 Le Chatelier moulds, ensuring specimens remain fully immersed as per code requirements.
PAVEMENT CORE DRILLING MACHINE WITH PETROL ENGINE
Complete with Honda Petrol Engine, Plastic water tank and a tool kit. Detailed specifications as mentioned in the long description. Diamond core drill bit available at extra cost and offered separately.
COMPRESSION TESTING MACHINE (CTM)-DIGITAL
Our CTM Machine features advanced load cell technology for precise force measurement and a stable plate model for accurate load centering. With manual pace rate control, you can easily adjust testing speeds across a wide range of conditions, ensuring versatility in all your testing needs. Safety and efficiency are integrated with an auto-stop function and a digital display that shows load readings in both KN and N/mm², automatically calculated for ease and accuracy. Ideal for any construction project, this machine helps maintain the highest quality standards.
