LATERAL PRESSURE ASSEMBLY
In a triaxial test setup, a lateral pressure assembly is used to apply a controlled pressure around the specimen to simulate in-situ conditions or the natural confining pressures that the material would experience underground. This assembly is crucial in determining the strength and deformation properties of soil or rock under controlled laboratory conditions.
SOIL HYDROMETER WITH HYDROMETER JAR
The Soil hydrometer is a precision instrument used for determining the specific gravity of soil suspensions, particularly in hydrometer analysis for particle size distribution. It measures specific gravity within a range of 0.995 to 1.038, with graduations at 0.001 intervals, and is calibrated at 20°C. As per IS 2720, Part-IV, 1985. Complete with Soil Hydrometer, Hydrometer Jar and Rubber cork.
ACCELERATED CURING TANK
Accelerated Curing Tank designed to accommodate concrete cube moulds (capacities ranging from 3 to 36 cubes of 15 cm and various sizes), suitable for cement mortar cube moulds. Provides accelerated curing by boiling water method up to 100 ± 2°C and warm water curing at 55 ± 2°C, with provision for normal curing at 27 ± 2°C. Conforms to IS: 9013 and IS: 516 standards.
FLUX OVEN - 50 KG - SS - 50 TO 400° C
Double walled, inner chamber MS, Outer CRC with paint , 100 mm thick glass wool insulation , air heaters placed at both side for uniform heat distribution Temp. Range. 50˚C to 400˚C , Auto tune Dual Display Digital, forced air circulation, Working on 440 Volts AC three Phase.
PLATE BEARING TEST APPARATUS-IS 1888
As per IS:1888-1982 (R.A.2021), Supplied with Hand operated Hydraulic Jack 500 KN, High pressure flexible pipe of 5 meter length, Ball and socket arrangement, Magnetic base -4 Nos, Dial Gauge 0.01 X 25 mm - 4 Nos, Datum Bar, Grooved square M.S.Plates of 60 cm, 45 cm and 30 cm. Load Truss and anchor spikes to be purchased separately
UNIVERSAL OR COMBINATION PERMEAMETER
Consists of one gunmetal mould wooden stand 100 mm dia x 127.3 mm height with extension collar, drainage base, drainage cap, metallic clamping ring, two porous stone for base & top, wooden stand with nine glass tubes of 6 mm, 10 mm, 20 mm, 25 mm, 40 mm, 50 mm, 60 mm, 70 mm & 75mm dia, complete with rubber connecting tube 3 meter long with pinch cock, Air brass tube, rubber stopper, bottom tank of copper with chromium plating with pinch cock.
BISHOP PORE PRESSURE APAPRATUS (10KG/CM²)
The Bishop pore pressure apparatus is used in a triaxial test system to accurately measure and control the pore water pressure within the soil sample during testing. It allows precise monitoring of the pore water pressure within the soil specimen, which is essential for determining the effective stress in the soil. Effective stress is critical in soil mechanics as it influences the soil's shear strength, compressibility, and overall behavior under load.
FLEXURAL TEST ATTACHMENT FOR CTM
This is an attachment to be connected to CTM.The CTM should be capable of applying the load at a rate 0.7 N/mm2/min (rate of loading being 4 kN/min for 150 mm specimens and 1.8 kN/min for 100 mm specimens). As per IS 516 (Part 1/Sec 1) : 2021, IS: 9399-1979, BS: 1881-Part 118, ASTM C78
PERMEABILITY MOULD (FOR SOIL) 100MM DIA
The permeability test of soil, as per IS:11209, is intended to determine the coefficient of permeability, which describes how easily water can flow through soil. This parameter is essential for understanding groundwater movement, soil drainage properties, and designing earth structures like dams, retaining walls, and foundations.
