FLAKINESS GAUGE - COMPLETE S.S.
Used to determine the percentage of particles in a coarse aggregate material that have a thickness (smallest dimension) of less than one-half of the nominal size. Particle is flaky when its thickness (smallest dimension) is less than 0.6 of the mid-size of the sieve fraction.
PAN MIXER-60 LTRS-WITH REMOVABLE PAN, TROLLEY AND STAND
Suitable to Cast at least 12 Cube Mould of 15 cm at a Time in single batch. The machine is capable to caste second batch immediately after first batch as the first pan can be removed with trolley and placed on the table. And with the help of second pan, second mix design can be started.
EXTRA DRUM WITH TROLLEY FOR PAN MIXER - 40 LTR
EXTRA DRUM WITH TROLLEY FOR PAN MIXER
YARN SHRINKAGE MAGAZINE-30 POSITIONS
The Yarn Shrinkage is equipped with a removable 30-position magazine, within which the suspended yarn hanks are pre-loaded with weights.
TWO PHASE HEAT TRANSFER APPARATUS-
Boiling and condensation processes in the transfer of heat from a hot to a colder region in numerous applications, e.g. power generation, refrigeration, refining, heat transmission, etc.
SAMPLING/MIXING TRAY - 1500 X 1500 X 100MM
Fabricated from Mild steel CRC sheet. Size : 1500 mm x 1500 mm x 100 mm. Used for sampling and mixing concrete specimen
40 MM SQUARE PLATTEN SET- FOR COMPRESSION FRAME JIG ASSEMBLY - EN 196
This jig is designed for testing of 40 x 40 x 160mm cement prism after breaking in Flexure and also can be adapted with 50mm platen to test 2” or 50mm mortar cement cube specimen. This jig can be fitted to Compression Test Machine
ACRYLIC - SLUMP TEST APPARATUS - MINI
Kantro Mini-Slump Cone, The Kantro layout is widely accepted in research and laboratories to test the fluid flow and rheology of cement paste or mortar. Made of Acrylic, Dimensions of mini-slump apparatus 38 mm high with at the top diameters of 57 mm and 19 mm at the bottom. Base plate (Glass/acrylic) available at extra cost
PERMEABILITY APPARATUS FOR GEOTEXTILE - AUTOMATIC - ASTM D4491 - FALLING HEAD TEST - NO LOAD CONDITION
Closed loop system comprises of Main working unit mounted on Table Top Bench with back support, Upper unit made of Transparent acrylic material, Geo‑textile specimen holder assembly between Upper & Lower unit, Inlet and outlet valves with PVC Pipe network, Head change measurement using Automatic Solenoid valve, Continuous Liquid Level Sensor & Dedicated HMI Touch screen controller. Complete with Overhead and Bottom Collection tank.
PERMEABILITY APPRATUS FOR GEOTEXTILE-MANUAL OBSERVATION--CONSTANT HEAD TEST-NO LOAD CONDITION-WITHOUT TANKS AND CIRCULATION SYSTEM
Comprises of Main working unit mounted on Table Top Bench with back support, Upper & Lower unit made of Transparent acrylic material, Geo‑textile specimen holder assembly between Upper & Lower unit, Inlet and outlet valves with PVC Pipe network, Head differential measurement arrangement mounted on a stand, Manual observation of quantity of flow (in case of Constant Head Test).
CONSISTENCY TEST FOR MICRO SURFACING
This Test is used to determine the consistency of slurry seal and micro surfacing mxture. As per IRC:SP:100-2014, Appendix-3.
