HYDRAULIC PRESS - 25 TON - AUTOMATIC
This is electrically operated version of the manual press. The pumping is done by gearmotor drive. Simply press a button & it will start building pressure & will stop automatically at set pressure by means of a pressure switch. Evacuable die set available at extra cost
POROSITY AND DENSITY DETERMINATION OF ROCK AS PER IS 13030 WITHOUT VACCUM PUMP
The System consists of Vacuum Vessel such that the sample can be immersed in water under vacuum of less than 0.8 kPa for a period of at least one hour. Supplied with Vacuum system with Vacuum Indicator and desiccator but without Oven,agitator to remove trapped air, sample container, Electronic weighing Balance and Vernier caliper.
DROP MELTING POINT APPARATUS FOR PETROLEUM WAX - IP 371 & U.S. PHARMACOPEIA - DIGITAL INDICATOR WITH ACCESSORIES
EIE Drop Melting Point Apparatus – Complete as per IP 371, supplied with necessary test accessories and IP 40C & IP 41C thermometers.
SURFACE ABRASION TESTER FOR CONCRETE & MORTAR BY ROTATING CUTTER METHOD - ASTM C944
Abrasion Resistance of Concrete can be used as a measure of its durability. Concrete surfaces may deteriorate in the long run due to abrasion caused by various factors such as sliding, scraping and abrasive materials carried by water etc. Supplied complete with Rotating Device, Agitation Paddle,Test Container and Abrasive Charges. Mould to prepare the sample available at extra cost
VIBRATING HAMMER (WITH HAMMER PLATE)
Used for the compaction of concrete specimens. Using the appropriate tamping foot, it can also be used for compacting concrete cube.
FINNED TUBE HEAT EXCHANGER APPARATUS-
Finned tube Heat exchanger is a device in which heat is transferred from one fluid to another. The apparatus consists of a concentric tube heat exchanger. Hot water flows through inner tube in one direction only and cold water flows through the outer tubes. Direction of cold fluid flow can be changed from parallel or counter to hot water so that unit can be operated as parallel or counter flow heat exchanger. Flow rates of hot and cold water are measured using Rota meters. A mono block pump is used to circulate the hot water from a re‑cycled type water tank, which is fitted with heaters and Digital Temperature Controller.
SHEAR STRENGTH TESTING MACHINE FOR MASONRY - ASTM E519
The Shear Strength Testing Machine for Masonry is a computer-controlled servo-hydraulic testing system designed for evaluating the diagonal tensile (shear) strength of masonry panels in accordance with ASTM E519. The machine provides accurate load application, and automated data acquisition through an integrated touchscreen control system, ensuring reliable and repeatable test results.
DRY BATH - EIE-409(B) - 25 MM X 15 HOLE
Accommodates test tubes and micro centrifuge tube for microbiology and clinical and laboratory incubation, boiling, inactivation, wet washing samples, concentration enzyme analysis and other general industries use.
PORTABLE TOUCH SCREEN HMI BASED - PREMIUM REFLECTANCE METER / WHITENESS METER
Principles - Whiteness is property of Luminous Objects. Whiteness is measured in terms of diffuse Reflectance, which is the ratio of reflected light measured at 90° after passing through a suitable filter and the incident light that is generally at 45° to the surface of the sample. With 45° Diffuse Reflectance head for whiteness & brightness measurement. This Instrument is Filter less - 2 colors wavelength provided on selectable switch with long life secondary standard.
SIEVE SHAKER - FOR RECTANGULAR SIEVES - 45.7 X 66 X 7.5 CM
The body and the base of Sieve Shaking Machine is made of mild steel and the top rotating plate is made of mild steel / plate with arrangement for fixing 10 Nos. test sieves 45.7 cm (L) x 66 cm (W) x 7.5 cm (H) with rigid clamp. Supplied Without Sieves.
CONSTANT TEMPERATURE AIR BATH - FOR GREASE PENETRATION TEST - ASTM D217
Constant Temperature Air Bath for Grease Penetration is designed for controlled-temperature conditioning of grease samples prior to penetration testing in accordance with IS 1448 (Part 60) / ASTM D217. The unit provides precise temperature control from 15°C to 30°C with ±0.5°C accuracy, using a microprocessor-based PID controller with PT-100 sensor. It features SS 304 construction, CFC-free refrigeration, insulated dual-door arrangement, adjustable shelves and calibrated reference thermometers for reliable laboratory operation.
HIGH TEMP. FURNACE-12" X 8" X 8"-1500°C
The High Temperature Furnace is a table-top type laboratory furnace designed for continuous operation up to 1400°C and intermittent operation up to 1500°C. The unit is suitable for high-temperature heat treatment, sintering, calcination, ceramic processing, refractory testing, material research, and laboratory applications requiring precise temperature control and uniform heating conditions.
SAND CONE TEST APPARATUS-(ASTM D1556)
The Sand Cone Apparatus is used to determine the in-place density and unit weight of any soil that can be excavated to a stable condition with hand tools.
VIBRATING MACHINE WITH DIGITAL TIMER-
The machine shall be capable for compaction of cement mortar cubes as per IS: 4031 and designed as per Standard IS : 10080. The complete frame assembly consists of device to hold a 7.06 cm cube mould to feed the sample in the mould. The frequency of vibration is 12000 ± 400 R.P.M. Vibration per minute. Supplied complete with one 7.06 cm cube mould with DIGITAL Timer. Complete with One No. poking rod to meet IS: 10086 requirements. The electric motor will be of reputed make such as GODREJ/CROMPTON MOTOR.
RELATIVE DENSITY APPARATUS-(ASTM D4253)
Relative density (also called density index) measures the compactness of cohesionless soils (sands, gravels). It indicates how close the soil is to its loosest or densest state, useful in foundation design, compaction control, and evaluation of liquefaction potential.
