MOR TESTING MACHINE - FOR REFRACTORY PRODUCTS
As per IS : 1528 (Part-5) ISO 5014, with TOUCH SCREEN control panel and automatic pace rate control to control the rate of loading at 1 Newton per mm square per second. Capacity 50 kgf. Least count 0.1 kgf. with adjustable test span to accommodate different size prismatic specimen up. Direct reading of MOR value in KN or Kgf. Working on 230 V AC single Phase 60 Hz. Supplied with special triangle support for the casting and refractory.
PAVER BLOCK COMPRESSION CUM FLEXURAL CUM SPLITTING TENSILE STRENGTH TESTING MACHINE
Universal Compression cum Flexural cum Splitting Tensile Strength Testing Machine - for paver block , Conforming to IS:15658:2021, EN 1338, ASTM C78, C496
HIGH SPEED MECHANICAL SOIL STIRRER - 16000 TO 18000 RPM
Complies with following International Standards. IS : 2720 (PART IV), AASHTHO T88, ASTM D422, BS : 1377‑2.
AMPOULE BREAK STRENGTH TESTER - 200 N - DIGITAL CONTROLLER WITH PC INTERFACE FACILITY - ISO 9187
Our Automatic Penetration Force Tester is unique instrument for Penetrability testing with good stability, wide application and convenient usage with function of step less speed adjusting, uniform motion, converting mode between manual and automatic operation. It is used for various applications such as Puncture/ Piercing force of Syringe or hypodermic needle in Rubber stopper, Piercing Force, Penetration test, Measuring Strength of Glass Ampules as well as Scientific Research Institute & many more.
TORSION, TORQUE & SELF TAPPING TEST FIXTURES OF MEDICAL BONE SCREW
This is an attachment to our Universal testing machine.
FOUR POINT BENDING / CYCLIC FIXTURE - FOR METALLIC BONE PLATES
This is an attached to our Universal Testing Machine
VETERINARY ARTIFICIAL VAGINA (AV) STERILIZER - 24" X 18" X 24"
The Artificial Vagina (AV) Sterilises can be used to sterilise the AVs meant for semen collection of cattle / buffalo bulls.Inner Chamber made of mirror polished Stainless Steel (S.S.316) material & Outer body is fabricated from S.S.304 matt finished material.
ELECTRONIC WEIGHING BALANCE -3 KG-0.1 GM (100 MG)-
High Impact FRP Body, Large platform size 250 x 300 mm, with built in battery back up and with certificate of stamping from W&M department. Multi function and Auto calibration with external weight.
ELECTRODE DRYING OVEN - 25 KG
Double walled construction, Inner stiffened in stout heavy frame. Inner chamber fabricated in low carbon steel duly finished and painted in heat resistant paint. Outer chamber fabricated in low carbon steel duly finished and powder coating painted. Heavily Insulated with high density insulation material from all sides. Rock woll 96kg/m3 Heating elements fabricated low watt density long life u type heaters in Incoloy Front door site opening type, sealed with ceramic gasket. Properly door side with ceramic cord to avoid any leakages. All connection in cold area for minimising maintenance & avoiding accidents. Temperature controlled by PID (Transfer base) Controller. Heater wiring shall be done is fibre glass wires. All switch gears and wiring shall be of reputed make.
ELECTRODE DRYING OVEN - 50 KG
Oven with Control Panel & 5 Nos Wire mesh Angle Frame Trays {Size: 490 x 500 x 490 mm – Rating: 02kw,Capacity: 50kg.
ELECTRODE DRYING OVEN - 100 KG
Capacity (approx.): 100 kg of electrodes, Working Space (H × W × D): 1000 × 650 × 500 mm, No. of Shelves: 10 Nos.wire mesh shelves, Temperature Range: Ambient to 400 °C
ELECTRODE DRYING OVEN - 200 KG
Capacity: 200 kg, Working Space (H × W × D): 1000 × 1070 × 500 mm, Number of Trays: 8 (wire mesh type), Temperature Range: Ambient to 400 °C, Input Power: 18 kW
GLOSS METER - MODEL GM-2680 - TRIPLE ANGLE - 20, 60 & 85 DEGREE
Measuring Range : 0.1/200GU, Angle : 20 degree/60 degree/85 degree
DROP POINT APPARATUS FOR GREASE-ASTM D566, IP 132-MOTORISED STIRRER WITH ACCESSORIES
This test method covers the determination of the dropping point of lubricating grease. This test method is not recommended for use at bath temperatures above 288°C. Supplied without Glass Thermometer
DOUBLE ROW SELF-ALIGNING BALL BEARING-SKF 1306K-IP220, DIN 51802
Imported bearing SKF make, double row self-aligning ball bearing, conforming to SKF 1306K with a steel cage as specified in IP220, DIN 51802 test method
