RCPT / RCMT COMBINED APPARATUS - 3 CELL
RCPT / RCMT COMBINED APPARATUS - 3 CELL - WITH DAQ SYSTEM & PC INTERFACE SOFTWARE WITH ACCESSORIES. There is a provision for selecting either RCPT or RCMT mode. Both the operation can not be done simultaneously. Separate PC interface software will be provided for RCPT & RCMT modes.
COPPER CUM SILVER CORROSION BATH - NON REFRIGERATED - DIGITAL - ASTM D130, IP 227
Complies with following International Standards - IP 154 & IS 1448 (P 15), ASTM D 130, IP 227, ASTM D4814. Bath only, without accessories.
UNIVERSAL TESTING MACHINE - DUAL LOAD CELLS - 5KN/60KN - TENSILE, SHEAR & DEFORMATION ADHESION TEST
Compliance Standards : EN 1348, EN 12003, EN 12004, BS 5980 (1980), ANSI 118.1, ISO 13007, BIS 15477:2019. This Machine is Suitable to Test Tile Adhesion upto type 4. If Testing of type 5 Required then Higher Machine Capacity is Required.
CONCRETE PERMEABILITY TESTER - 6 CELL - COMPACT
Compliance Standards : IS 516 (Part 2/Sec1): 2018, BS EN 12390 (PART 8). Applications : Water Penetration testing machine is at 6 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure. An operator can test any - Concrete cylinder of size 150 mm dia. X 160 mm high or cube moulds of 150 x 150 x 150 mm dimensions. Supplied complete with necessary Spanners and Air compressor of required capacity. Moulds are available at extra cost
AUTOMATIC COMPRESSION TESTING MACHINE - 500 KN
This machine is essential for precise and efficient cement testing, ensuring compliance with industry standards critical to civil construction. It is widely used in construction projects and laboratories to validate the quality and compressive strength of Cement-concrete materials. Conforms to IS: 4031 (Part 6), EN 196-1, ASTM C109, ISO 679, BS 4550-3.4,JIS R 5201 and other international standards. Automatic Operation: Minimal user input required; automatic rapid piston approach, test speed adjustment, and motor stop after specimen failure.Adjustable pace rate (1 kN/sec to 10 kN/sec) with dual-stage pump for fast and precise execution. Robust Frame: High-stiffness welded frame with a heavy-duty spherical seat for accurate specimen alignment.PC software for two-way communication, result storage, and report printing.
CHLORIDE METER FOR FRESH CONCRETE - DY-2501A
The chloride meter has the best performance to quickly and accurately measure the chloride ion concentration contained in raw concrete/aggregate. All equipment required for measurement, such as standard calibration solution, cleaning solution, and sensor, are stored in the case, making it convenient to carry and use. From calibration to measurement and output, it is conducted in an interactive manner, making it easy for anyone to operate. In addition, it uses a large 128×64 LCD that cannot be found in existing chloride ion meters, so that the measurement results can be checked in real time during calibration or measurement, and the self-diagnosis function in the CPU checks the device status in real time and is configured to notify the user immediately if an abnormality occurs.
CHLORIDE METER FOR HARDENED CONCRETE
Chloride content in concrete is on important index indicating the status of reinforced concrete structure in respect to chloride-induced corrosion. This Meter is a solid state meter that provides accurate monitoring of free chloride ions with Combi Chloride Electrode in an aqueous solutions. Measurement of - Content of Acid Soluble chloride (%), - Content of Water-Soluble chloride (%) and - Total Volume of chloride (kg/m3). Measuring Range : 0.0005% ~ 2.0000%
HALF CELL POTENTIOMETER - PORTABLE-WITH HMI
The half-cell potential test is a non-destructive method used to assess the probability of corrosion in uncoated reinforcing steel within concrete. The method involves measuring the potential difference between the steel reinforcement and a reference electrode placed on the concrete surface. The test results are qualitative, providing an indication of corrosion probability.
CALIBRATION ANVIL FOR CONCRETE TEST HAMMER
The Calibration Anvil for Concrete Test Hammer is used to verify the accuracy of rebound hammers, as per IS: 516 (Part 5/Section 4): 2020 and ASTM C 805. Made of hardened steel, it provides a standard reference to ensure accurate and consistent rebound measurements for concrete strength testing. Steel anvil for verification of the hammer, defined with a hardness between 64 - 68 HRC and a mass of (20 ± 1) kg and a diameter of approximately 150 mm. Weight 20 kgs approx.
AUTOMATIC MAN HOLE COVER TESTING MACHINE - 500KN
The manhole cover testing machine is designed as per IS 12592. The machine will be able to accommodate manhole cover of 1200 mm x 1200 mm size. With variable AUTOMATIC pace rate CONTROL from 1 kN / sec to 10 kN / sec. The machine display digital read out, showing actual load, peak load and permanent set .The machine is able to conduct 5 cyclic load test automatically for permanent set. The machine is able to hold the load for 30 sec to conduct the load test and there after will be release automatically.
APPARATUS FOR THE MEASUREMENT OF BEAM CMOD AND TOUGHNESS OF FRC - FULLY AUTOMATIC - SERVO CONTROLLED - EN 14651
The "Apparatus for the Measurement of Beam CMOD and Toughness of FRC - Fully Automatic - Servo Controlled" is designed to evaluate the fracture properties of Fiber Reinforced Concrete (FRC) in compliance with ASTM C1550-08, EN 14488-5, EN 14651, and ASTM C1609 standards. This advanced, fully automatic system is servo-controlled to ensure precise, consistent loading and accurate measurement of crack mouth opening displacement (CMOD) and toughness. It provides reliable data on the material's performance and durability, making it ideal for testing FRC under controlled conditions to assess its structural integrity.
FULLY AUTOMATIC COMPRESSION/FLEXURAL TESTING MACHINE - 100 KN/15 KN
The EIE Automatic Cement Compression and Flexure Testing Machines are designed to simplify testing processes, ensuring accurate and efficient results. Their robust design, intuitive operation, and advanced safety features make them ideal for laboratories focused on high-quality testing of construction materials. Supplied complete with flexural and compression test jigs
JODHPUR MINI COMPACTOR
Used for determining the relationship between the moisture content and density of compacted soil.
FLOW CONE APPARATUS-EN 445-FOR MORTAR, MUD AND GROUT
The flow cone apparatus is used to determine the fluidity and workability of grout, particularly for prestressing ducts in post-tensioned structures. The test measures the time required for a specified volume of grout to flow through an orifice of a standardized cone. The measured flow time helps assess the consistency and suitability of the grout for application. Made of Stainless Steel 304. Supplied with 4 interchangeable (8, 9, 10 and 11 mm diameter) nozzles with fitting bush. Interchangeable nozzle 12.7 mm and 15mm available at Extra Cost.
J14 FUNNEL WITH STAND - WITH MEASURING CYLINDER
The J14 Funnel is used for measuring the flowability of grouts, mortars, and other fluid materials. It is similar to flow cone tests but typically designed for more fluid materials, especially in tunneling, grouting, and construction applications. As per EN 445, EN 934-6 , NF P18-507, JIS A 6204.
GROUT VOLUME CHANGE (MICROMETER BRIDGE SET)
The Grout Volume Change (Micrometer Bridge Set) conforms to ASTM C1090 standards for measuring grout volume changes. It includes a micrometer bridge, depth gauge, cylinder mould, and accessories, and is used to measure height changes due to hydration, settlement, evaporation, and other physical/chemical effects during hardening.
COMPRESSION PROVING RING - 3000 KN - CLASS 1
Provided with self aligning compression Pads. Repeatability is as stipulated in IS : 4169-1967. The ring is supplied complete with dial gauge and calibration chart, Packed in polished wooden boxes.
COMPRESSION PROVING RING -2000 KN - CLASS 1
Provided with self aligning compression Pads. Repeatability is as stipulated in IS : 4169-1967. The ring is supplied complete with dial gauge and calibration chart, Packed in polished wooden boxes.
APPARENT BULK DENSITY OF UNPACKED MORTAR POWDER - CSTB 2435-
Bulk Density of Cement Apparatus is used for the measurement of the apparent density (bulk density) of powders and non-cohesive materials.
SAYBOLT VISCOMETER-WITH FOUR SAYBOLT TUBES
A Saybolt Viscometer with Four Saybolt Tubes, as per ASTM D88 and IS:3117-2019, measures the viscosity of petroleum products. It features four tubes for simultaneous testing, with results expressed in Saybolt Universal Seconds (SUS). This instrument ensures accurate viscosity measurement for quality control in the petroleum and lubricant industries.Electrically heated model complete with Four Saybolt Tubes and electrical control panel with all accessories. With 4 Nos. Saybolt Viscosity Flask but without optional accessories.
BULK DENSITY APPARATUS (AS PER ISO 13503-2 : 2024)
The Bulk Density Apparatus is used to determine the bulk density of proppants, such as sand or ceramic materials, used in hydraulic fracturing operations. This test method is specified in ISO 13503-2:2024, ensuring standardization in proppant quality assessment.
FLEXURAL STRENGTH TESTING MACHINE - FOR TIMBER - EN 408
EN 408:2010+A1:2012 specifies the test methods for determining the flexural properties of structural timber and glued laminated timber (glulam). The Flexural Testing Machine used for these tests comply with the requirements to perform four-point bending and three-point bending tests accurately.
DETERMINATION OF RESISTANCE TO THERMAL SHOCK-LIQUID TO AIR-20 C TO 170 C-
Liquid-to-air thermal shock testing exposes samples to extreme temperature changes, causing stress from material expansion and contraction. This leads to fatigue, cracking, and coating failure. While effective for detecting weaknesses, it may not reflect real-world conditions, so results should be interpreted with caution and supplemented with other tests.
WATER LEVEL INDICATOR - 200 METER WITH SENSOR
Water level Indicator: This Instrument is used for measuring the Ground Water Depth and completely a mechanical Instrument, which gives the direct Indication of the measuring depth through Buzzer and LED. It has marking on every 1 meter & below one meter will be measured by using the measuring Tape for 1 cm fine resolution. It is very light in weight and duly packed in a polished wooden box. Length of cable Range 200 meter (Round 2 core wire)
